Telemecanique Sensors OsiSense XC Series Plunger Limit Switch, 1 NO/1 NC, IP66, Zamak Housing, 240V ac, 3A

RS-stocknr.:: 235-975
Artikelnummer Distrelec:: 304-10-770
Fabrikantnummer:: XCKM110H29
Fabrikant:: Telemecanique Sensors

Telemecanique Sensors OsiSense XC Series Plunger Limit Switch, 1 NO/1 NC, IP66, Zamak Housing, 240V ac, 3A

Subtotaal (1 eenheid)*

€ 65,10

(excl. BTW)

€ 78,77

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Beperkte voorraad

7 resterend, klaar voor verzending
36 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 65,10

*prijsindicatie

Alternatief

Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.

Honeywell Technologies GLE Series Plunger Limit Switch, 2 NO/2 NC, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 6A

RS-stocknr.: 223-3189

Per stuk

€ 197,48

(excl. BTW)

€ 238,95

(incl. BTW)

RS-stocknr.:: 235-975
Artikelnummer Distrelec:: 304-10-770
Fabrikantnummer:: XCKM110H29
Fabrikant:: Telemecanique Sensors

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Telemecanique Sensors
	Actuator Type	Plunger
	Product Type	Limit Switch
	IP Rating	IP66
	Contact Configuration	1 NO/1 NC
	Housing Material	Zamak
	Contact Type	Snap Action
	Terminal Type	Screw Clamp
	Switching Current	3A
	Series	OsiSense XC
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Standards/Approvals	CSA, IEC, REACH, RoHS, UL, CCC
	Width	64mm
	Length	64mm
	Depth	30mm
	Hazardous Area Certification	No
	Mechanical Life	20000000Cycles
	Operating Force	45N
	Conduit Entry	M20

	Alles selecteren
	Merk Telemecanique Sensors
	Actuator Type Plunger
	Product Type Limit Switch
	IP Rating IP66
	Contact Configuration 1 NO/1 NC
	Housing Material Zamak
	Contact Type Snap Action
	Terminal Type Screw Clamp
	Switching Current 3A
	Series OsiSense XC
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Standards/Approvals CSA, IEC, REACH, RoHS, UL, CCC
	Width 64mm
	Length 64mm
	Depth 30mm
	Hazardous Area Certification No
	Mechanical Life 20000000Cycles
	Operating Force 45N
	Conduit Entry M20

Vrijgesteld

Land van herkomst:: ID

Telemecanique Sensors Osizense XC Series Limit Switch, IP66, 45N Operating Force - XCKM110H29

This limit switch is a Compact electromechanical device used to detect mechanical movement and provide discrete electrical switching in industrial control systems. It is designed for use where robust position sensing is required, delivering snap-action contacts and a plunger actuator for direct mechanical engagement. The unit is intended for control panels, machinery safety circuits and automation feedback tasks in demanding industrial environments.

Features and Benefits:

• Snap-action contacts provide fast, decisive switching at actuation
• 45N operating force ensures consistent actuation under load
• 1NO/1NC contact arrangement supports dual control logic
• 250VDC switching capability allows use in DC control circuits
• 3A switching current suits moderate control and signalling loads
• 20,000,000-cycle mechanical life minimises replacement frequency

Applications

• Suitable for end-of-travel detection on conveyors and actuators
• Ideal for safety interlocks on guarding and access panels
• Used with motor starters for position-based control logic
• Can be used for batch counters and move/stop sensing in machinery

What environmental protection does it offer for dusty or wet areas?

The enclosure is rated to IP66, providing dust-tight protection and resistance to powerful water jets.

What material is the housing and why does that matter?

The body is MADE from zamak, which delivers Durable corrosion-resistant support for industrial mounting.

How is the switch wired into control systems?

Terminals use screw-clamp connections to secure conductors for reliable electrical contact.

What temperature range can it operate within?

It functions across temperatures from -25°C up to 70°C for a wide range of ambient conditions.

What conduit entry is provided for cable routing?

A single M20 entry accommodates standard conduit fittings for cable protection and strain relief.