Telemecanique Sensors XCKN Series Roller Lever Limit Switch, 1 NO/1 NC, IP65, Plastic Housing, 240V ac, 10A

RS-stocknr.:: 125-8461
Artikelnummer Distrelec:: 303-97-205
Fabrikantnummer:: XCKN2118P20
Fabrikant:: Telemecanique Sensors

Telemecanique Sensors XCKN Series Roller Lever Limit Switch, 1 NO/1 NC, IP65, Plastic Housing, 240V ac, 10A

Subtotaal (1 eenheid)*

€ 22,04

(excl. BTW)

€ 26,67

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

32 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 22,04

*prijsindicatie

RS-stocknr.:: 125-8461
Artikelnummer Distrelec:: 303-97-205
Fabrikantnummer:: XCKN2118P20
Fabrikant:: Telemecanique Sensors

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Telemecanique Sensors
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	IP Rating	IP65
	Contact Configuration	1 NO/1 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	10A
	Terminal Type	Screw Clamp
	Series	XCKN
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	70°C
	Width	30mm
	Depth	44.5mm
	Length	30mm
	Standards/Approvals	CSA, IEC, UL
	Hazardous Area Certification	No
	Operating Force	0.1Nm
	Mechanical Life	10000000Cycles
	Conduit Entry	1 Cable Gland x M20 x 1.5

	Alles selecteren
	Merk Telemecanique Sensors
	Actuator Type Roller Lever
	Product Type Limit Switch
	IP Rating IP65
	Contact Configuration 1 NO/1 NC
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 10A
	Terminal Type Screw Clamp
	Series XCKN
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 70°C
	Width 30mm
	Depth 44.5mm
	Length 30mm
	Standards/Approvals CSA, IEC, UL
	Hazardous Area Certification No
	Operating Force 0.1Nm
	Mechanical Life 10000000Cycles
	Conduit Entry 1 Cable Gland x M20 x 1.5

Telemecanique Sensors XCKN Series Limit Switch, IP65, 10A Switching Current - XCKN2118P20

This limit switch provides precise mechanical position sensing for industrial control systems, using a roller lever actuator to detect movement and trigger circuit changes. Designed for routine use in automation and machinery control, it delivers snap-action switching performance with a plastic enclosure rated for protected environments.

Features and Benefits:

• Snap-action contacts deliver Rapid make/break switching response • 1NO/1NC contact arrangement supports versatile control logic • 10A switching current enables direct control of many loads • IP65 enclosure protects against dust and water jets • Low operating torque of 0.1Nm reduces actuation wear • Mechanical endurance of 10000000 cycles supports long service life

Applications

• Suitable for conveyor end-of-travel detection • Ideal for machine-tool limit sensing in production lines • Used with motor starters for position interlocking • Can be used for safety interlocks in assembly cells • Used for gate and hatch position monitoring

What temperature range can it operate within?

It functions reliably between -25°C and 70°C for typical industrial ambient conditions.

How are electrical connections MADE to the device?

Wiring is secured via screw-clamp terminals and routed through an M20x1.5 cable gland.

What approvals support its use in regulated installations?

It carries CSA, IEC and UL recognitions indicating adherence to established standards.

How does the contact switching performance suit DC applications?

The contacts are rated for switching up to 250V DC at specified currents for DC control circuits.

What materials and ingress protection apply to the enclosure?

The housing is manufactured from plastic and is certified to IP65 for protection against dust ingress and low-pressure water jets.