Honeywell Technologies SZL-VL Series Roller Lever Limit Switch, SPDT, IP67, Metal Housing, 380V ac, 10A

RS-stocknr.:: 144-8397
Fabrikantnummer:: SZL-VL-S-A-N-M
Fabrikant:: Honeywell

Honeywell Technologies SZL-VL Series Roller Lever Limit Switch, SPDT, IP67, Metal Housing, 380V ac, 10A

Subtotaal (1 eenheid)*

€ 54,05

(excl. BTW)

€ 65,40

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

6 stuk(s) klaar voor verzending
36 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 54,05

*prijsindicatie

RS-stocknr.:: 144-8397
Fabrikantnummer:: SZL-VL-S-A-N-M
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Metal
	Contact Type	Snap Action
	Switching Current	10A
	Terminal Type	M12
	Series	SZL-VL
	Switching DC Voltage	220V dc
	Switching AC Voltage	380V ac
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	70°C
	Length	28.5mm
	Standards/Approvals	cULus, CE, CCC
	Depth	41.2mm
	Width	82.5mm
	Hazardous Area Certification	No
	Conduit Entry	M12
	Operating Force	18Ncm
	Mechanical Life	10000000Cycles
	Mounting Orientation	Front

	Alles selecteren
	Merk Honeywell
	Product Type Limit Switch
	Actuator Type Roller Lever
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Metal
	Contact Type Snap Action
	Switching Current 10A
	Terminal Type M12
	Series SZL-VL
	Switching DC Voltage 220V dc
	Switching AC Voltage 380V ac
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 70°C
	Length 28.5mm
	Standards/Approvals cULus, CE, CCC
	Depth 41.2mm
	Width 82.5mm
	Hazardous Area Certification No
	Conduit Entry M12
	Operating Force 18Ncm
	Mechanical Life 10000000Cycles
	Mounting Orientation Front

Land van herkomst:: CN

Honeywell SZL-VL Series Limit Switch, IP67, 10A Switching Current - SZL-VL-S-A-N-M

This limit switch is a rugged mechanical switch designed to detect position or movement in industrial control systems. It operates via a side-mounted rotary actuator with a fixed lever to translate mechanical motion into electrical switching, suitable for automation and machinery environments where concise, dependable detection of travel or end-of-travel is required.

Features and Benefits:

• SPDT snap-action contact provides quick state change and clear signalling
• IP67 die-cast enclosure ensures protection against dust and immersion
• Switching capability up to 10 A at 380V AC enables direct control of high-current loads
• Mechanical endurance rated for 10,000,000 cycles reduces service interventions
• Operating temperature range -20 to 70 °C supports varied industrial climates
• M12 Terminal and conduit entry simplify secure electrical connection

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Used for limit sensing on machine tools and automated jigs
• Ideal for integrating with motor starters and contactors in control panels
• Can be used for position feedback on material-handling equipment

What material is the enclosure MADE from and why does that matter?

The housing is die-cast metal, which provides structural strength and helps resist impact in demanding industrial settings.

How is the switch wired into control systems?

It presents an M12 Terminal Interface for connection and an M12 conduit entry as standard for secure cable routing.

Are there any certifications for international markets?

It carries cULus, CE and CCC approvals, indicating conformity with relevant electrical and safety requirements in multiple regions.

How should I orient the device when mounting?

The unit is designed for front mounting, enabling predictable actuator engagement and straightforward panel installation.

What contact behaviour can I expect during operation?

The contacts use snap-action switching for Rapid transition, and the contact arrangement is single-pole double-throw for flexible circuit integration.