Honeywell GLA Series Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 600V ac, 6A

RS-stocknr.:: 186-8223
Artikelnummer Distrelec:: 301-38-719
Fabrikantnummer:: GLAC01A4J
Fabrikant:: Honeywell

Honeywell GLA Series Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 600V ac, 6A

Subtotaal (1 eenheid)*

€ 240,64

(excl. BTW)

€ 291,17

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 240,64

*prijsindicatie

RS-stocknr.:: 186-8223
Artikelnummer Distrelec:: 301-38-719
Fabrikantnummer:: GLAC01A4J
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Actuator Type	Plunger
	Product Type	Limit Switch
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Screw
	Series	GLA
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	600V ac
	Maximum Operating Temperature	85°C
	Width	42mm
	Depth	42mm
	Length	82mm
	Standards/Approvals	CCC, CE, CSA, UL
	Hazardous Area Certification	NO
	Mounting Orientation	Side
	Conduit Entry	20 mm
	Operating Force	0.33N
	Mechanical Life	15000000Operations

	Alles selecteren
	Merk Honeywell
	Actuator Type Plunger
	Product Type Limit Switch
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Screw
	Series GLA
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 600V ac
	Maximum Operating Temperature 85°C
	Width 42mm
	Depth 42mm
	Length 82mm
	Standards/Approvals CCC, CE, CSA, UL
	Hazardous Area Certification NO
	Mounting Orientation Side
	Conduit Entry 20 mm
	Operating Force 0.33N
	Mechanical Life 15000000Operations

Land van herkomst:: GB

Honeywell GLA Series Limit Switch, 20mm Conduit Entry, 1 NC/1 NO Contact Configuration - GLAC01A4J

This limit switch is a Compact actuator device designed to detect mechanical movement and provide electrical switching in industrial control systems. It is built for installation where a plunger actuator is required to convert linear motion into a change of electrical state and is suited to environments needing ingress protection and temperature tolerance.

Features and Benefits:

• IP67 rated enclosure for dust‑proof and temporary immersion protection
• Electrostatic epoxy‑coated zinc housing for corrosion resistance
• Snap‑action contacts delivering 1NC and 1NO switching for clear signal separation
• Rated switching capacity 600V AC at 6A for high‑voltage circuits
• Mechanical endurance of 15,000,000 operations for extended service life
• Operating temperature range -25 to 85°C for variable thermal conditions

Applications

• Suitable for conveyor end‑of‑travel detection in manufacturing lines
• Ideal for machine‑tool limit sensing in metalworking facilities
• Used with automated Gates for position confirmation in access control
• Can be used for safety interlocks on packaging equipment
• Used for actuator position feedback in pneumatic systems

What electrical connection method does it provide for wiring?

Terminals use screw‑type connections enabling secure conductor attachment and straightforward maintenance.

How is the device mounted to equipment frames?

It is intended for side mounting to interfaces where lateral plunger engagement is required.

What mechanical input effort is needed to operate the actuator?

The plunger requires an operating force of 0.33 N to shift the contact mechanism.

What conduit provision is available for cable entry?

A 20mm conduit entry is provided to accept standard industrial cable glands and conduit fittings.

Which approvals cover its use in industrial installations?

It holds recognised approvals including CCC, CE, CSA and UL for regulatory acceptance.

Approvals

UL; CSA