Honeywell HDLS Series Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 10A

RS-stocknr.:: 193-2021
Fabrikantnummer:: LS4D3K
Fabrikant:: Honeywell

Honeywell HDLS Series Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 10A

Subtotaal (1 eenheid)*

€ 538,28

(excl. BTW)

€ 651,32

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

5 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 538,28

*prijsindicatie

RS-stocknr.:: 193-2021
Fabrikantnummer:: LS4D3K
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Limit Switch
	Actuator Type	Plunger
	IP Rating	IP67
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Terminal Type	M20
	Switching Current	10A
	Series	HDLS
	Switching AC Voltage	240V ac
	Switching DC Voltage	24V dc
	Minimum Operating Temperature	-12°C
	Maximum Operating Temperature	93°C
	Depth	62mm
	Length	106.7mm
	Width	41.1mm
	Standards/Approvals	CE, CSA, UL
	Hazardous Area Certification	No
	Operating Force	17.8N
	Mechanical Life	50000000Operations

	Alles selecteren
	Merk Honeywell
	Product Type Limit Switch
	Actuator Type Plunger
	IP Rating IP67
	Contact Configuration SPDT
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Terminal Type M20
	Switching Current 10A
	Series HDLS
	Switching AC Voltage 240V ac
	Switching DC Voltage 24V dc
	Minimum Operating Temperature -12°C
	Maximum Operating Temperature 93°C
	Depth 62mm
	Length 106.7mm
	Width 41.1mm
	Standards/Approvals CE, CSA, UL
	Hazardous Area Certification No
	Operating Force 17.8N
	Mechanical Life 50000000Operations

Honeywell HDLS Series Limit Switch, 10A Switching Current, IP67 - LS4D3K

This limit switch is a plunger-actuated industrial position switch designed for control and safety functions within automated and electromechanical systems. It provides changeover contact operation suitable for monitoring movement or end-of-travel conditions in demanding environments where sealed protection and robust switching capacity are required.

Features and Benefits:

• IP67-rated enclosure enables operation in wet or dusty conditions
• Die-cast zinc housing offers enhanced mechanical durability
• SPDT snap-action contact delivers reliable single-pole changeover switching
• 10A switching capability supports moderate mains and control loads
• 17.8N actuation force gives predictable mechanical response
• 50 million operations mechanical life reduces replacement frequency

Applications

• Suitable for limit detection on conveyor end stops
• Ideal for position sensing in packaging machinery
• Used with industrial doors for open/close monitoring
• Can be used for actuator end-of-travel feedback
• Used for safety interlocks in assembly lines

What Terminal provision is available for wiring?

The unit uses an M20 Terminal Interface for cable entry and connection.

What temperatures will it withstand during operation?

It is rated for continuous use between -12°C and 93°C.

How does the switch handle alternating and direct voltages?

It is specified to switch AC loads up to 240V and DC circuits up to 24V within its current rating.

Which approvals indicate compliance with recognised standards?

It has been tested to and carries CE, CSA and UL approvals.

Approvals

UL, CSA

Standards

EN60947-5-1, IEC947-5-1, AC15, A300 or A600 , DC13, Q300