Honeywell 14CE Series Plunger Limit Switch, SPDT, IP66, IP65, IP67, IP68, Die Cast Zinc Housing, 250V, 5A
- RS-stocknr.:
- 217-7103
- Artikelnummer Distrelec:
- 304-22-790
- Fabrikantnummer:
- 14CE1-Q
- Fabrikant:
- Honeywell
Subtotaal (1 eenheid)*
€ 198,54
(excl. BTW)
€ 240,23
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 25 stuk(s) vanaf 29 juni 2026
- Plus verzending 20 stuk(s) vanaf 14 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 198,54 |
*prijsindicatie
- RS-stocknr.:
- 217-7103
- Artikelnummer Distrelec:
- 304-22-790
- Fabrikantnummer:
- 14CE1-Q
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Product Type | Limit Switch | |
| Actuator Type | Plunger | |
| IP Rating | IP66, IP65, IP67, IP68 | |
| Contact Configuration | SPDT | |
| Housing Material | Die Cast Zinc | |
| Contact Type | Snap Action | |
| Switching Current | 5A | |
| Series | 14CE | |
| Minimum Operating Temperature | 0°C | |
| Switching AC Voltage | 250V | |
| Switching DC Voltage | 28V | |
| Maximum Operating Temperature | 70°C | |
| Depth | 44mm | |
| Standards/Approvals | CE, EN 60947-5-1 | |
| Length | 16mm | |
| Width | 44mm | |
| Hazardous Area Certification | No | |
| Mounting Orientation | Side | |
| Operating Force | 11.8N | |
| Mechanical Life | 10000000Cycles | |
| Conduit Entry | 20 mm | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Product Type Limit Switch | ||
Actuator Type Plunger | ||
IP Rating IP66, IP65, IP67, IP68 | ||
Contact Configuration SPDT | ||
Housing Material Die Cast Zinc | ||
Contact Type Snap Action | ||
Switching Current 5A | ||
Series 14CE | ||
Minimum Operating Temperature 0°C | ||
Switching AC Voltage 250V | ||
Switching DC Voltage 28V | ||
Maximum Operating Temperature 70°C | ||
Depth 44mm | ||
Standards/Approvals CE, EN 60947-5-1 | ||
Length 16mm | ||
Width 44mm | ||
Hazardous Area Certification No | ||
Mounting Orientation Side | ||
Operating Force 11.8N | ||
Mechanical Life 10000000Cycles | ||
Conduit Entry 20 mm | ||
Honeywell 14CE Series Limit Switch, 20mm Conduit Entry, Top Pin Plunger Actuator Type - 14CE1-Q
This limit switch is a compact, mechanically actuated device designed to detect position changes and provide reliable switching in industrial control systems. It is intended for gang mounting and offers snap-action contact operation with a top-mounted plunger actuator, suitable for environments requiring robust enclosure protection and routine switching of electrical loads.
Features and Benefits:
• Die-cast zinc housing delivers resilient enclosure protection
• SPDT contacts enable changeover switching for control circuits
• Snap-action contact mechanism ensures swift state transition
• IP66, IP65, IP67, IP68 ratings permit use in harsh environments
• Mechanical life rated at 10 million cycles supports long service intervals
• Operating force of 11.8 N provides consistent actuation response
• SPDT contacts enable changeover switching for control circuits
• Snap-action contact mechanism ensures swift state transition
• IP66, IP65, IP67, IP68 ratings permit use in harsh environments
• Mechanical life rated at 10 million cycles supports long service intervals
• Operating force of 11.8 N provides consistent actuation response
Applications
• Suitable for conveyor end-of-travel detection in automation lines
• Ideal for limit sensing on material handling equipment
• Used for position feedback on industrial actuators and valves
• Can be used for safety interlocks in electrical cabinets
• Used with remote equipment where cable termination is required
• Ideal for limit sensing on material handling equipment
• Used for position feedback on industrial actuators and valves
• Can be used for safety interlocks in electrical cabinets
• Used with remote equipment where cable termination is required
What electrical loads can it handle?
It switches AC loads up to 250V at 5A and DC loads up to 28 V, using a snap-action contact design suitable for typical control and signalling circuits.
How is the unit connected on-site?
Termination is via cable entry using a 20mm conduit interface, allowing straightforward field cabling and gland installation.
What temperature range is supported during operation?
The switch is designed to operate between 0 °C and 70 °C, accommodating common industrial ambient conditions.
Are there recognised standards applicable to its safety and performance?
It complies with EN 60947-5-1 and carries the CE designation, reflecting conformance to relevant European switch performance requirements.
Gerelateerde Links
- Honeywell 14CE Series Plunger Limit Switch IP65 IP67 Die Cast Zinc Housing 5A
- Honeywell 14CE Series Top Plunger Limit Switch IP65 IP67 Die Cast Zinc Housing 5A
- Honeywell 14CE Series Plunger Limit Switch IP68 IP66 Die Cast Zinc Housing 5A
- Honeywell 14CE Series Pin Plunger Limit Switch IP68 IP66 Die Cast Zinc Housing 5A
- Honeywell 14CE Series Roller Plunger Limit Switch IP66 IP68 Die Cast Zinc Housing 5A
- Honeywell 14CE Series Roller Plunger Limit Switch IP66 IP67 Die Cast Zinc Housing 5A
- Honeywell Plunger Limit Switch IP66 IP68, Die Cast Zinc Housing
- Honeywell 14CE Series Cross Roller Plunger Limit Switch IP65 IP67 Die Cast Zinc Housing