Honeywell GLA Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 600V ac, 10A

RS-stocknr.:: 217-7129
Artikelnummer Distrelec:: 303-01-500
Fabrikantnummer:: GLAB01A1A
Fabrikant:: Honeywell

Honeywell GLA Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 600V ac, 10A

Subtotaal (1 eenheid)*

€ 238,63

(excl. BTW)

€ 288,74

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 238,63

*prijsindicatie

RS-stocknr.:: 217-7129
Artikelnummer Distrelec:: 303-01-500
Fabrikantnummer:: GLAB01A1A
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Screw
	Switching Current	10A
	Series	GLA
	Minimum Operating Temperature	-40°C
	Switching AC Voltage	600V ac
	Maximum Operating Temperature	85°C
	Width	30.5mm
	Depth	31.1mm
	Standards/Approvals	UL, CSA, CE, CCC, RoHS
	Length	110mm
	Hazardous Area Certification	NO
	Mounting Orientation	Multi Directional
	Mechanical Life	10000000Cycles
	Conduit Entry	PG13.5

	Alles selecteren
	Merk Honeywell
	Product Type Limit Switch
	Actuator Type Roller Lever
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Screw
	Switching Current 10A
	Series GLA
	Minimum Operating Temperature -40°C
	Switching AC Voltage 600V ac
	Maximum Operating Temperature 85°C
	Width 30.5mm
	Depth 31.1mm
	Standards/Approvals UL, CSA, CE, CCC, RoHS
	Length 110mm
	Hazardous Area Certification NO
	Mounting Orientation Multi Directional
	Mechanical Life 10000000Cycles
	Conduit Entry PG13.5

Honeywell Limit Switch, Roller Lever Actuator, 10A Switching Current - GLAB01A1A

This limit switch is a robust industrial control device designed to detect mechanical movement and provide discrete electrical signalling in automation and machinery applications. Housed in a corrosion-resistant die-cast zinc enclosure, it is suitable for environments where ingress protection and reliable snap-action switching are required. The unit uses a roller lever actuator and a screw-terminal Interface to integrate with control circuits and protective conduits.

Features and Benefits:

• IP67-rated enclosure for protection against dust and water ingress
• Snap-action contacts for fast, decisive switching performance
• SPDT contact arrangement enabling changeover switching capability
• 10A switching current for handling moderate load circuits
• 600V AC switching rating for high-voltage control applications
• Mechanical life of 10 million cycles for extended duty operation

Applications

• Suitable for actuator end-of-travel detection on production lines
• Ideal for conveyor position sensing in material handling systems
• Used for limit monitoring on industrial presses and tooling
• Can be used for door position feedback in heavy-duty enclosures
• Used with safety interlocks requiring rugged environmental sealing

What temperature range can it operate within?

It functions across a wide ambient span from -40°C up to a maximum of 85°C, supporting installations in cold storage or near heat-generating equipment.

How is electrical connection implemented for field wiring?

Field conductors terminate to screw-type terminals and a PG13.5 conduit entry accommodates common cable glands for secure routing.

Which approvals support its use in regulated installations?

It carries UL, CSA, CE, CCC and RoHS approvals, permitting deployment where recognised safety and material standards are required.

Can it be oriented in different mounting positions?

The design accepts multi-directional mounting, allowing flexible installation angles without affecting switch actuation.