Honeywell GLC Series Roller Lever Limit Switch, SPDT, IP66, Die Cast Zinc Housing, 240V ac, 6A
- RS-stocknr.:
- 308-1822
- Artikelnummer Distrelec:
- 303-99-506
- Fabrikantnummer:
- GLCB01A1A
- Fabrikant:
- Honeywell
Subtotaal (1 eenheid)*
€ 106,40
(excl. BTW)
€ 128,74
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 11 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 106,40 |
*prijsindicatie
- RS-stocknr.:
- 308-1822
- Artikelnummer Distrelec:
- 303-99-506
- Fabrikantnummer:
- GLCB01A1A
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Actuator Type | Roller Lever | |
| Product Type | Limit Switch | |
| IP Rating | IP66 | |
| Contact Configuration | SPDT | |
| Housing Material | Die Cast Zinc | |
| Contact Type | Snap Action | |
| Switching Current | 6A | |
| Series | GLC | |
| Switching DC Voltage | 250V dc | |
| Minimum Operating Temperature | -40°C | |
| Switching AC Voltage | 240V ac | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | CSA, UL, CE, CCC | |
| Depth | 26.35mm | |
| Length | 68.5mm | |
| Width | 30.5mm | |
| Hazardous Area Certification | NO | |
| Mechanical Life | 10000000Cycles | |
| Operating Force | 0.12Nm | |
| Conduit Entry | PG13.5 | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Actuator Type Roller Lever | ||
Product Type Limit Switch | ||
IP Rating IP66 | ||
Contact Configuration SPDT | ||
Housing Material Die Cast Zinc | ||
Contact Type Snap Action | ||
Switching Current 6A | ||
Series GLC | ||
Switching DC Voltage 250V dc | ||
Minimum Operating Temperature -40°C | ||
Switching AC Voltage 240V ac | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals CSA, UL, CE, CCC | ||
Depth 26.35mm | ||
Length 68.5mm | ||
Width 30.5mm | ||
Hazardous Area Certification NO | ||
Mechanical Life 10000000Cycles | ||
Operating Force 0.12Nm | ||
Conduit Entry PG13.5 | ||
- Land van herkomst:
- GB
Honeywell GLC Series Limit Switch, IP66, 6A Switching Current - GLCB01A1A
This limit switch is a Compact electromechanical device designed to detect and control motion in automation and industrial systems. It provides snap-action switching with both normally closed and normally open contacts, suitable for integrating into control circuits where precise position sensing and reliable switching at defined actuation points are required.
Features and Benefits:
• Roller lever actuator delivering repeatable mechanical engagement
• Snap-action contacts enabling quick state changes under load
• Rated for switching at 240V AC and 250V DC ensuring versatile use
• Conduit entry PG13.5 allowing standard cable gland installation
• Wide ambient tolerance from -40 to 85°C for varied environments
• Mechanical endurance of 10,000,000 cycles for extended service life
• Snap-action contacts enabling quick state changes under load
• Rated for switching at 240V AC and 250V DC ensuring versatile use
• Conduit entry PG13.5 allowing standard cable gland installation
• Wide ambient tolerance from -40 to 85°C for varied environments
• Mechanical endurance of 10,000,000 cycles for extended service life
Applications
• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for limit detection in automated packaging machinery
• Used with industrial contactors for position interlocks in plants
• Can be used for actuator end-stop sensing in robotics systems
• Used for safety monitoring on material handling equipment
• Ideal for limit detection in automated packaging machinery
• Used with industrial contactors for position interlocks in plants
• Can be used for actuator end-stop sensing in robotics systems
• Used for safety monitoring on material handling equipment
What electrical circuits can it control?
It can switch alternating loads up to 240V AC and direct loads up to 250V DC with a continuous switching current capability of 6A, compatible with many control and signalling circuits.
How is the enclosure constructed for industrial environments?
The enclosure is formed from zinc treated with an electrostatic epoxy coating to resist mechanical wear and provide a robust barrier against contaminants.
What ingress protection does it offer for harsh locations?
The unit meets IP66 protection, which prevents dust ingress and resists powerful water jets, making it suitable for wash-down and dusty conditions.
How are the contact configurations arranged for wiring flexibility?
It provides one normally closed and one normally open contact in a snap-action arrangement, enabling both break and make control within a single device.
What approvals support its use in regulated installations?
It holds recognised approvals from CSA, UL and CE, indicating conformity with multiple regional safety and performance standards.
Approvals
UL; CSA
Standards
EN 50047
Gerelateerde Links
- Honeywell GLC Series Roller Lever Limit Switch IP67, Die Cast Zinc Housing
- Honeywell GLC Series Roller Lever Limit Switch IP66 240 V ac, 6 A
- Honeywell GLC Series Rotary Lever Limit Switch IP66 240 V ac, 6 A
- Honeywell GLC Series Roller Lever Limit Switch IP66 240 V ac, 10 A
- Honeywell GLC Series Adjustable Roller Lever Limit Switch IP66 240 V ac, 10 A
- Honeywell GLC Series Adjustable Roller Lever Limit Switch IP66 240 V ac, 6 A
- Honeywell GLC Series Plunger Limit Switch IP66 240 V ac, 6 A
- Honeywell GLC Series Rod Limit Switch IP66 240 V ac, 6 A