Honeywell GLC Series Adjustable Roller Lever Limit Switch, 2 NC, IP66, Die Cast Zinc Housing, 600V ac, 10A

RS-stocknr.:: 311-2263
Fabrikantnummer:: GLCC06A2B
Fabrikant:: Honeywell

Honeywell GLC Series Adjustable Roller Lever Limit Switch, 2 NC, IP66, Die Cast Zinc Housing, 600V ac, 10A

Subtotaal (1 eenheid)*

€ 151,90

(excl. BTW)

€ 183,80

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

6 stuk(s) klaar voor verzending
13 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 151,90

*prijsindicatie

RS-stocknr.:: 311-2263
Fabrikantnummer:: GLCC06A2B
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Actuator Type	Adjustable Roller Lever
	Product Type	Limit Switch
	Contact Configuration	2 NC
	IP Rating	IP66
	Housing Material	Die Cast Zinc
	Contact Type	Slow Action
	Switching Current	10A
	Terminal Type	M20
	Series	GLC
	Switching AC Voltage	600V ac
	Minimum Operating Temperature	-40°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Standards/Approvals	UL 508, EN/IEC 60947-5-1, CSA C22.2 No. 14, CE, CCC
	Length	68.5mm
	Depth	26.35mm
	Width	30.5mm
	Hazardous Area Certification	NO
	Operating Force	13N
	Mechanical Life	10000000Cycles
	Conduit Entry	20 mm

	Alles selecteren
	Merk Honeywell
	Actuator Type Adjustable Roller Lever
	Product Type Limit Switch
	Contact Configuration 2 NC
	IP Rating IP66
	Housing Material Die Cast Zinc
	Contact Type Slow Action
	Switching Current 10A
	Terminal Type M20
	Series GLC
	Switching AC Voltage 600V ac
	Minimum Operating Temperature -40°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Standards/Approvals UL 508, EN/IEC 60947-5-1, CSA C22.2 No. 14, CE, CCC
	Length 68.5mm
	Depth 26.35mm
	Width 30.5mm
	Hazardous Area Certification NO
	Operating Force 13N
	Mechanical Life 10000000Cycles
	Conduit Entry 20 mm

Land van herkomst:: GB

Honeywell GLC Series Limit Switch, 20mm Conduit Entry, 2 NC Contact Configuration - GLCC06A2B

This limit switch provides robust position sensing and control for industrial automation and electrical systems, employing a roller lever actuator to detect mechanical movement and trigger circuit changes. It is designed for demanding environments where ingress protection and reliable contact operation are required, and it integrates with conduit-based installations.

Features and Benefits:

• IP66 enclosure prevents dust ingress and heavy water jets
• Die-cast zinc housing delivers Durable mechanical protection
• 2 NC slow-action contacts support controlled switching behaviour
• Switching capability up to 600V AC and 10 A enables heavy-duty loads
• Operating range from -40°C to 85°C suits extreme ambient conditions
• Mechanical endurance rated to 10,000,000 cycles for long service life

Applications

• Suitable for end-of-travel detection on conveyor lines
• Ideal for machine-tool limit monitoring in production cells
• Used for safety interlocks on access doors and guards
• Can be used for position sensing in material-handling equipment

What conduit size is provided for electrical entry?

An M20 conduit entry is incorporated to accept standard threaded conduit and gland fittings.

How much actuation force is required to operate the mechanism?

The actuator requires an operating force of 13 N to initiate contact change.

What Terminal arrangement is available for wiring?

The unit uses a Terminal configuration designed for two normally closed contacts suitable for series safety or control circuits.

How does the actuator type affect installation alignment?

The adjustable roller lever allows fine alignment of the tripping point to match the moving part’s geometry without replacing the actuator.