Telemecanique Sensors XCKJ Series Rod Limit Switch, 1 NO/1 NC, IP66, Zamak Housing, 240V ac, 3A

RS-stocknr.:: 700-4318
Artikelnummer Distrelec:: 304-10-768
Fabrikantnummer:: XCKJ10559H29
Fabrikant:: Telemecanique Sensors

Telemecanique Sensors XCKJ Series Rod Limit Switch, 1 NO/1 NC, IP66, Zamak Housing, 240V ac, 3A

Subtotaal (1 eenheid)*

€ 112,60

(excl. BTW)

€ 136,25

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Beperkte voorraad

3 resterend, klaar voor verzending
62 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 8 stuk(s) vanaf 20 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 112,60

*prijsindicatie

RS-stocknr.:: 700-4318
Artikelnummer Distrelec:: 304-10-768
Fabrikantnummer:: XCKJ10559H29
Fabrikant:: Telemecanique Sensors

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Telemecanique Sensors
	Actuator Type	Rod
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66
	Housing Material	Zamak
	Contact Type	Snap Action
	Switching Current	3A
	Terminal Type	Screw Clamp
	Series	XCKJ
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Length	77mm
	Depth	44mm
	Standards/Approvals	CCC, CSA, EN 60204-1, IEC 60204-1, UL
	Width	40mm
	Hazardous Area Certification	No
	Mechanical Life	30000000Cycles
	Conduit Entry	M20
	Mounting Orientation	Multi Directional
	Operating Force	0.25Nm

	Alles selecteren
	Merk Telemecanique Sensors
	Actuator Type Rod
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC
	IP Rating IP66
	Housing Material Zamak
	Contact Type Snap Action
	Switching Current 3A
	Terminal Type Screw Clamp
	Series XCKJ
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Length 77mm
	Depth 44mm
	Standards/Approvals CCC, CSA, EN 60204-1, IEC 60204-1, UL
	Width 40mm
	Hazardous Area Certification No
	Mechanical Life 30000000Cycles
	Conduit Entry M20
	Mounting Orientation Multi Directional
	Operating Force 0.25Nm

Land van herkomst:: ID

Telemecanique Sensors XCKJ Series Limit Switch, 1 NO/1 NC Contact Configuration, IP66 Rating - XCKJ10559H29

This limit switch provides mechanical position sensing for industrial automation and control systems, using a rod actuator to detect movement and trigger control circuits. It is housed in a corrosion-resistant zamak enclosure with a high-level ingress protection rating suitable for demanding environments. The device employs snap-action contacts to perform Rapid make-or-break switching for control and safety interfaces.

Features and Benefits:

• 1NO1NC contact arrangement offers flexible switching logic • Snap-action contacts deliver fast, positive state changes • IP66 protection enables use in dusty or water-exposed locations • Rated for 240V AC switching to Interface with standard control supplies • 3A carrying capacity supports modest load switching at 250V DC • Mechanical life of 30,000,000 cycles ensures extended operational service

Applications

• Suitable for conveyor end-of-travel detection in factories • Ideal for door position sensing on industrial enclosures • Used for machine tool limit detection in production lines • Can be used for safety interlocks in material-handling equipment

What conduit connection is provided for electrical entry?

The unit accepts an M20 conduit entry, enabling standard threaded conduit or cable gland installations.

What Terminal type is used for field wiring?

Screw-clamp terminals are provided for secure conductor attachment and straightforward maintenance.

Which mounting orientations are possible for installation?

The design supports multi-directional mounting to accommodate varied machine geometries.

What temperature range is suitable for reliable operation?

It operates between -25°C and 70°C, covering common industrial ambient conditions.

What is the actuator torque or force requirement for operation?

The rod actuator requires an operating force equivalent to 0.25 Nm to change contact state.

Approvals

UL; CSA