Honeywell Technologies SL1 Series Roller Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 24V ac
- RS-stocknr.:
- 808-7689
- Fabrikantnummer:
- SL1-AK
- Fabrikant:
- Honeywell Technologies
Subtotaal (1 eenheid)*
€ 378,79
(excl. BTW)
€ 458,34
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 7 stuk(s) vanaf 21 september 2026
- Plus verzending 25 stuk(s) vanaf 28 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 378,79 |
*prijsindicatie
- RS-stocknr.:
- 808-7689
- Fabrikantnummer:
- SL1-AK
- Fabrikant:
- Honeywell Technologies
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell Technologies | |
| Product Type | Limit Switch | |
| Actuator Type | Roller Plunger | |
| IP Rating | IP67 | |
| Contact Configuration | SPDT | |
| Housing Material | Die Cast Zinc | |
| Contact Type | Snap Action | |
| Terminal Type | Snap-In | |
| Series | SL1 | |
| Switching AC Voltage | 24V ac | |
| Minimum Operating Temperature | -10°C | |
| Switching DC Voltage | 24V dc | |
| Maximum Operating Temperature | 70°C | |
| Depth | 44.2mm | |
| Width | 59.8mm | |
| Standards/Approvals | EN 60947-5-1, UL 508, CSA C22.2 No. 14, IEC 60947-5-1 | |
| Length | 18mm | |
| Hazardous Area Certification | No | |
| Conduit Entry | PG13.5 | |
| Operating Force | 11.8N | |
| Mounting Orientation | Side | |
| Mechanical Life | 20000000Operations | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell Technologies | ||
Product Type Limit Switch | ||
Actuator Type Roller Plunger | ||
IP Rating IP67 | ||
Contact Configuration SPDT | ||
Housing Material Die Cast Zinc | ||
Contact Type Snap Action | ||
Terminal Type Snap-In | ||
Series SL1 | ||
Switching AC Voltage 24V ac | ||
Minimum Operating Temperature -10°C | ||
Switching DC Voltage 24V dc | ||
Maximum Operating Temperature 70°C | ||
Depth 44.2mm | ||
Width 59.8mm | ||
Standards/Approvals EN 60947-5-1, UL 508, CSA C22.2 No. 14, IEC 60947-5-1 | ||
Length 18mm | ||
Hazardous Area Certification No | ||
Conduit Entry PG13.5 | ||
Operating Force 11.8N | ||
Mounting Orientation Side | ||
Mechanical Life 20000000Operations | ||
Honeywell SL1 Series Limit Switch, Roller Plunger Actuator Type, Die Cast Zinc Housing - SL1-AK
This limit switch provides precise mechanical actuation for industrial control and safety interlocks, using a roller plunger actuator to detect linear motion and change electrical state. It is housed in a robust die-cast zinc enclosure with ingress protection suitable for harsh production environments, and employs a snap-action contact arrangement to deliver consistent switching behaviour at low voltages.
Features and Benefits:
• SPDT snap-action contacts deliver Rapid switching response and clear changeover
• IP67 enclosure ensures protection against dust ingress and temporary immersion
• 11.8 N operating force gives predictable actuation repeatability
• Mechanical life rated for 20,000,000 operations supports long duty cycles
• Operating range from −10 to 70 °C enables use across varied ambient conditions
• PG13.5 conduit entry provides a standard cable Interface for industrial wiring
• IP67 enclosure ensures protection against dust ingress and temporary immersion
• 11.8 N operating force gives predictable actuation repeatability
• Mechanical life rated for 20,000,000 operations supports long duty cycles
• Operating range from −10 to 70 °C enables use across varied ambient conditions
• PG13.5 conduit entry provides a standard cable Interface for industrial wiring
Applications
• Suitable for position detection on automated assembly conveyors
• Ideal for end-of-travel switches on pneumatic actuators
• Used with motor control systems for safety interlock signalling
• Can be used for limit detection on packaging machinery
• Suitable for retrofit monitoring on industrial presses
• Ideal for end-of-travel switches on pneumatic actuators
• Used with motor control systems for safety interlock signalling
• Can be used for limit detection on packaging machinery
• Suitable for retrofit monitoring on industrial presses
How are electrical connections MADE to the device?
Terminals use a snap-in arrangement for secure, Compact wiring within control panels and enclosures.
What contact configuration is provided for integration with control logic?
A single-pole double-throw contact set supplies both normally open and normally closed paths for straightforward interfacing.
Which standards cover the device’s electrical and safety characteristics?
It meets recognised industrial switch standards covering electrical performance and operational testing.
Is the actuator orientation flexible for panel layout?
The unit is designed for side mounting to accommodate installation where lateral actuation is required.
Approvals
UL, CSA.
Gerelateerde Links
- Honeywell Technologies SL1 Series Roller Plunger Limit Switch IP67 250V
- Honeywell Technologies SL1 Series Roller Plunger Limit Switch IP67 250V, 5A
- Honeywell Technologies SL1 Series Roller Plunger Limit Switch IP67 125V, 0.1A
- Honeywell Technologies SL1 Series Roller Limit Switch IP67 250V
- Honeywell Technologies Top Plunger Limit Switch IP66, Die Cast Zinc Epoxy Coated Housing
- Honeywell Technologies BZE6 Series Plunger Limit Switch IP66 600V
- Honeywell Plunger Limit Switch SPDT 250V ac ac Max, 5A Max
- Honeywell Technologies Plunger Limit Switch IP67 300V ac