Telemecanique Sensors XCMD Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, IP68, Zamak Housing, 400V
- RS-stocknr.:
- 814-8006
- Fabrikantnummer:
- XCMD2502L2
- Fabrikant:
- Telemecanique Sensors
Subtotaal (1 eenheid)*
€ 87,60
(excl. BTW)
€ 106,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Beperkte voorraad
- 18 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 10 stuk(s) vanaf 28 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 87,60 |
*prijsindicatie
- RS-stocknr.:
- 814-8006
- Fabrikantnummer:
- XCMD2502L2
- Fabrikant:
- Telemecanique Sensors
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Telemecanique Sensors | |
| Product Type | Limit Switch | |
| Actuator Type | Roller Plunger | |
| Contact Configuration | 1 NO/1 NC | |
| IP Rating | IP66, IP67, IP68 | |
| Housing Material | Zamak | |
| Contact Type | Slow Break | |
| Terminal Type | Cable | |
| Series | XCMD | |
| Minimum Operating Temperature | -25°C | |
| Switching AC Voltage | 400V | |
| Maximum Operating Temperature | 70°C | |
| Length | 50mm | |
| Depth | 16mm | |
| Width | 30mm | |
| Standards/Approvals | UL, RoHS, IEC, EN, CSA, CE, CCC | |
| Hazardous Area Certification | No | |
| Mechanical Life | 10000000Cycles | |
| Mounting Orientation | Vertical | |
| Operating Force | 7N | |
| Alles selecteren | ||
|---|---|---|
Merk Telemecanique Sensors | ||
Product Type Limit Switch | ||
Actuator Type Roller Plunger | ||
Contact Configuration 1 NO/1 NC | ||
IP Rating IP66, IP67, IP68 | ||
Housing Material Zamak | ||
Contact Type Slow Break | ||
Terminal Type Cable | ||
Series XCMD | ||
Minimum Operating Temperature -25°C | ||
Switching AC Voltage 400V | ||
Maximum Operating Temperature 70°C | ||
Length 50mm | ||
Depth 16mm | ||
Width 30mm | ||
Standards/Approvals UL, RoHS, IEC, EN, CSA, CE, CCC | ||
Hazardous Area Certification No | ||
Mechanical Life 10000000Cycles | ||
Mounting Orientation Vertical | ||
Operating Force 7N | ||
Niet conform
- Land van herkomst:
- ID
Telemecanique Sensors XCMD Series Limit Switch, 7N Operating Force, IP66/IP67/IP68 - XCMD2502L2
This limit switch is a Compact actuator designed to detect mechanical movement and provide dry-contact signalling in industrial control systems. It is intended for vertical mounting where a roller-style plunger interacts with moving parts to open or close electrical circuits. The device offers environmental sealing suitable for harsh conditions and supports connection via an attached cable for straightforward integration into AC control circuits.
Features and Benefits:
• Roller plunger actuator reduces wear and supports repeated activations • 1NO and 1NC slow-break contacts permit controlled switching of circuits • Enclosure meets multiple ingress ratings for wet environments • Zamak housing provides sturdy mechanical protection for internals • Operating force of 7N enables consistent actuation with low effort • Rated for up to 400V AC switching of control loads
Applications
• Suitable for conveyor end-of-travel detection in assembly lines • Ideal for position feedback on industrial presses and lifts • Used for safety interlock monitoring on access panels • Can be used for limit detection in material-handling systems
What temperature range can it operate within on-site?
It functions across a working span from -25 °C up to 70 °C, accommodating typical factory ambient conditions.
How Durable is the mechanism under continuous cycling?
The switch is specified for a mechanical life of 10,000,000 cycles, allowing long service in high-cycle applications.
What certification standards does it meet for installation?
It carries multiple approvals including UL, RoHS, IEC, EN, CSA, CE and CCC for compliance with diverse regulatory regimes.
How is the unit mounted and oriented for correct operation?
It is designed for vertical mounting to align the roller plunger with the actuated moving element.
What form of electrical termination is provided for wiring?
The device uses a cable-style Terminal for direct wiring into control circuits.
Gerelateerde Links
- Telemecanique Sensors XCMD Series Roller Plunger Limit Switch IP66 IP68 240V
- Telemecanique Sensors XCMD Series Roller Plunger Limit Switch IP68 IP66 50V ac,
- Telemecanique Sensors XCMD Series Roller Plunger Limit Switch IP68 IP66 240V ac,
- Telemecanique Sensors XCMD Series Roller Plunger Limit Switch IP68 IP66
- Telemecanique Sensors XCMD Series Roller Plunger Limit Switch IP67 IP66
- Telemecanique Sensors XCMD Series Roller Plunger Limit Switch IP66 IP68
- Telemecanique Sensors XCMD Series Roller Plunger Limit Switch IP68 IP67 240V ac, 1.5A
- Telemecanique Sensors XCMD Series Roller Plunger Limit Switch IP66 IP68 50V ac, 3A