Honeywell NGC Series Plunger Limit Switch, 2 NC/2 NO, IP67, Plastic Housing, 400V ac, 10A
- RS-stocknr.:
- 894-3396
- Artikelnummer Distrelec:
- 301-53-049
- Fabrikantnummer:
- NGCPA50AX32B
- Fabrikant:
- Honeywell
Subtotaal (1 eenheid)*
€ 102,47
(excl. BTW)
€ 123,99
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 102,47 |
*prijsindicatie
- RS-stocknr.:
- 894-3396
- Artikelnummer Distrelec:
- 301-53-049
- Fabrikantnummer:
- NGCPA50AX32B
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Actuator Type | Plunger | |
| Product Type | Limit Switch | |
| IP Rating | IP67 | |
| Housing Material | Plastic | |
| Contact Type | Positive Break | |
| Terminal Type | Cable | |
| Switching Current | 10A | |
| Series | NGC | |
| Minimum Operating Temperature | 25°C | |
| Switching AC Voltage | 400V ac | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | cUL, CCC, CE, IEC, RoHS, UL | |
| Width | 16.7mm | |
| Length | 30mm | |
| Depth | 60.6mm | |
| Hazardous Area Certification | NO | |
| Operating Force | 9.5N | |
| Mechanical Life | 5000000Cycles | |
| Mounting Orientation | Panel | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Actuator Type Plunger | ||
Product Type Limit Switch | ||
IP Rating IP67 | ||
Housing Material Plastic | ||
Contact Type Positive Break | ||
Terminal Type Cable | ||
Switching Current 10A | ||
Series NGC | ||
Minimum Operating Temperature 25°C | ||
Switching AC Voltage 400V ac | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals cUL, CCC, CE, IEC, RoHS, UL | ||
Width 16.7mm | ||
Length 30mm | ||
Depth 60.6mm | ||
Hazardous Area Certification NO | ||
Operating Force 9.5N | ||
Mechanical Life 5000000Cycles | ||
Mounting Orientation Panel | ||
Honeywell NGC Series Limit Switch, 9.5N Operating Force, IP67 - NGCPA50AX32B
This limit switch is a plunger-operated device designed to register and break control circuits in industrial settings. It is built for panel mounting and suited to automation tasks where a positive open action is required. The unit operates across a broad temperature range and is housed in a plastic enclosure rated for protection in harsh environments.
Features and Benefits:
• Positive break contact provides fail-safe circuit opening under load
• Rated switching capacity supports 10A at 400V for mains applications
• Cable termination simplifies connection in confined control cabinets
• Mechanical endurance of 5 million cycles minimises replacement frequency
• Panel-mounting form factor enables secure, repeatable installation
• Operating force of 9.5 N gives consistent actuation response
• Rated switching capacity supports 10A at 400V for mains applications
• Cable termination simplifies connection in confined control cabinets
• Mechanical endurance of 5 million cycles minimises replacement frequency
• Panel-mounting form factor enables secure, repeatable installation
• Operating force of 9.5 N gives consistent actuation response
Applications
• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for position sensing on industrial actuators and valves
• Used for limit detection in packaging and material handling systems
• Can be used for safety interlocks on access panels and guards
• Ideal for position sensing on industrial actuators and valves
• Used for limit detection in packaging and material handling systems
• Can be used for safety interlocks on access panels and guards
What environmental protection does it offer for outdoor or wet areas?
The enclosure meets IP67 ingress protection which prevents dust ingress and allows temporary immersion in water.
How does temperature affect operation in cold installations?
The switch is rated to function between −70°C and 25°C, enabling use in low-temperature environments without loss of specified actuation force.
What approvals support its use in regulated installations?
The unit carries approvals including cUL, CCC, CE, IEC, RoHS and UL for compatibility with multiple standards and markets.
How is electrical connection provided for integration into control wiring?
Electrical connection is via a pre-attached cable termination designed for direct wiring into control harnesses.