Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Nexperia
	Logic Family	74HC
	Logic Function	CMOS
	Number of Channels per Chip	10
	IC Type	Octal Buffer & Line Driver IC
	Input Type	Single Ended
	Output Type	3 State
	Polarity	Non-Inverting
	Mounting Type	Surface Mount
	Package Type	SOIC
	Pin Count	20
	Maximum High Level Output Current	7.8mA
	Maximum Low Level Output Current	-7.8mA
	Maximum Propagation Delay Time @ Maximum CL	165 ns @ 15 pF
	Dimensions	13 x 7.6 x 2.45mm
	Maximum Operating Supply Voltage	6 V
	Minimum Operating Supply Voltage	2 V
	Propagation Delay Test Condition	15pF

	Alles selecteren
	Merk Nexperia
	Logic Family 74HC
	Logic Function CMOS
	Number of Channels per Chip 10
	IC Type Octal Buffer & Line Driver IC
	Input Type Single Ended
	Output Type 3 State
	Polarity Non-Inverting
	Mounting Type Surface Mount
	Package Type SOIC
	Pin Count 20
	Maximum High Level Output Current 7.8mA
	Maximum Low Level Output Current -7.8mA
	Maximum Propagation Delay Time @ Maximum CL 165 ns @ 15 pF
	Dimensions 13 x 7.6 x 2.45mm
	Maximum Operating Supply Voltage 6 V
	Minimum Operating Supply Voltage 2 V
	Propagation Delay Test Condition 15pF

Land van herkomst:: CN

Use our solutions to improve signal integrity between lower drive outputs and higher loads. They include mixed 5 V and 3.3 V applications, with low propagation delay, and improved current drive and signal levels. Great in standard and advanced systems from TVs and phones to industrial monitoring

Mixed 5 V and 3.3 V applications
Improved current drive and voltage level of signals
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
TTL input options
3-state output options
Overvoltage tolerant options
Registered options

The 74HC244, 74HCT244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC

Input levels:
For 74HC244: CMOS level
For 74HCT244: TTL level
Octal bus interface
Non-inverting 3-state outputs
Complies with JEDEC standard no. 7 A
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
Multiple package options
Specified from 40 Cto +85 C and 40 Cto +125 C

Nexperia 74HC244D,653 10-Channel Buffer & Line Driver, 3-State, 20-Pin SOIC

Gerelateerde Links