- RS-stocknr.:
- 630-904
- Fabrikantnummer:
- SN75175N
- Fabrikant:
- Texas Instruments
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
40 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Prijs Per stuk
€ 4,09
(excl. BTW)
€ 4,95
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 4,09 |
5 - 9 | € 3,96 |
10 - 14 | € 3,80 |
15 - 19 | € 3,70 |
20 + | € 3,61 |
- RS-stocknr.:
- 630-904
- Fabrikantnummer:
- SN75175N
- Fabrikant:
- Texas Instruments
Datasheets
Wetgeving en compliance
Productomschrijving
RS-485 Line Drivers and Receivers, High Speed, Texas Instruments
A range of High Speed RS-485 Line Drivers, Receivers and Transceivers from Texas Instruments with data rates of 10 Mbit/s or over.
The SN75175 are monolithic quadruple differential line receivers with 3-state outputs. It is designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10megabits per second. Each of the two pairs of receivers has a common active-high enable.
The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of ±12 V. SN75175 is designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.
The SN65175 is characterized for operation from -40°C to 85°C. The SN75175 is characterized for operation from 0°C to 70°C.
RS-485 Line Drivers and Receivers
Specificaties
Kenmerk | Waarde |
---|---|
IC Type | Line Receiver IC |
Input Type | Differential |
Mounting Type | Through Hole |
Package Type | PDIP |
Pin Count | 16 |
Dimensions | 19.3 x 6.35 x 4.57mm |
- RS-stocknr.:
- 630-904
- Fabrikantnummer:
- SN75175N
- Fabrikant:
- Texas Instruments