INA KBS16-PP-AS Bearing with 16 mm ID 26 mm OD 840 N 780 N
- RS-stocknr.:
- 172-1233
- Fabrikantnummer:
- KBS16-PP-AS
- Fabrikant:
- INA
Ontvang bulkkorting
Voeg 5 meer toe om 4% te besparen
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 64,52
(excl. BTW)
€ 78,07
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 1 stuk(s) vanaf 16 november 2026
- Plus verzending 3 stuk(s) vanaf 24 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 1 - 4 | € 64,52 | - |
| 5 - 9 | € 61,93 | 4% |
| 10 + | € 60,65 | 5% |
*prijsindicatie
- RS-stocknr.:
- 172-1233
- Fabrikantnummer:
- KBS16-PP-AS
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Bearing | |
| Outside Diameter | 26mm | |
| Length | 36mm | |
| Inside Diameter | 16mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 840N | |
| Closure Type | Closed | |
| Static Load Rating | 780N | |
| Base to Bore Centerline | 13mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Bearing | ||
Outside Diameter 26mm | ||
Length 36mm | ||
Inside Diameter 16mm | ||
End Type Sealed | ||
Dynamic Load Rating 840N | ||
Closure Type Closed | ||
Static Load Rating 780N | ||
Base to Bore Centerline 13mm | ||
Standards/Approvals No | ||
Schaeffler Bearing, 16mm Inside Diameter, 26mm Outside Diameter - KBS16-PP-AS
This bearing is a sealed rotary component intended to support radial loads in Compact assemblies. It provides a protected rolling Interface for shafts in confined spaces, offering a combination of load capacity and sealed construction suitable for environments where contamination control and consistent rotational support are required.
Features and Benefits:
• 840N dynamic load capacity for sustained rotational forces
• 780N static load capacity for high standstill loads
• Sealed end type to restrict ingress and contamination
• 13mm base to bore centreline for precise mounting alignment
• 36mm overall length for constrained axial accommodation
• 780N static load capacity for high standstill loads
• Sealed end type to restrict ingress and contamination
• 13mm base to bore centreline for precise mounting alignment
• 36mm overall length for constrained axial accommodation
Applications
• Suitable for Compact drive assemblies in light vehicles
• Ideal for small gearbox input or output shafts
• Used with electric motor shaft supports in confined spaces
• Can be used for pulley or idler wheel rotational support
• Suitable for industrial equipment requiring contamination control
• Ideal for small gearbox input or output shafts
• Used with electric motor shaft supports in confined spaces
• Can be used for pulley or idler wheel rotational support
• Suitable for industrial equipment requiring contamination control
What mounting datum should I reference for alignment?
Use the 13mm base to bore centreline as the primary datum for siting and alignment.
How does the sealed construction affect maintenance intervals?
The sealed configuration reduces contaminant ingress, thereby extending lubrication life and lowering inspection frequency compared with unsealed units.
What load types is this unit primarily designed to handle?
It is designed mainly for radial loads, with the specified dynamic and static capacities guiding selection.
Which dimensional measurements define compatibility with shafts and housings?
Match the 16mm inside diameter for shaft fit and the 26mm outside diameter for housing-bore compatibility.
Gerelateerde Links
- INA KB16-PP-AS Bearing with 16 mm ID 26 mm OD 840 N 780 N
- INA KB16-PP Bearing with 16 mm ID 26 mm OD 840 N 780 N
- INA KB16 Bearing with 16 mm ID 26 mm OD 840 N 780 N
- INA KB16-P Bearing with 16 mm ID 26 mm OD 840 N 780 N
- INA KBO16-PP-AS Bearing with 16 mm ID 26 mm OD 800 N 620 N
- INA KB30-PP-AS Bearing with 30 mm ID 47 mm OD 3800 N 3600 N
- INA KB25-PP-AS Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- INA KBO50-PP-AS Bearing with 50 mm ID 75 mm OD 8900 N 6600 N