Ewellix Makers in Motion LBCD30 D -2LS Bearing with 30 mm ID 47 mm OD 4650 N 3250 N
- RS-stocknr.:
- 284-9683
- Fabrikantnummer:
- LBCD30 D -2LS
- Fabrikant:
- Ewellix Makers in Motion
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 143,61
(excl. BTW)
€ 173,77
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 15 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 143,61 |
| 5 - 9 | € 137,87 |
| 10 + | € 134,99 |
*prijsindicatie
- RS-stocknr.:
- 284-9683
- Fabrikantnummer:
- LBCD30 D -2LS
- Fabrikant:
- Ewellix Makers in Motion
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 47 mm | |
| Length | 68mm | |
| Inside Diameter | 30 mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 4650N | |
| Material | Steel | |
| Closure Type | Closed | |
| Base to Bore Centerline | 23.5mm | |
| Static Load Rating | 3250N | |
| Standards/Approvals | No | |
| Series | LBCD | |
| Alles selecteren | ||
|---|---|---|
Merk Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 47 mm | ||
Length 68mm | ||
Inside Diameter 30 mm | ||
End Type Sealed | ||
Dynamic Load Rating 4650N | ||
Material Steel | ||
Closure Type Closed | ||
Base to Bore Centerline 23.5mm | ||
Static Load Rating 3250N | ||
Standards/Approvals No | ||
Series LBCD | ||
- Land van herkomst:
- DE
Linear bearings, LBCD
Standard linear bearings LBCD from ISO range 3
Automatic self-alignment of max. ±30 angular minutes
Non-parallels between drive shaft and housing bore, produced by shaft deflection or assembly or manufacturing inaccuracies, can be compensated
Misalignments of drive shafts with one another cannot be compensated
Angled pivoting of bearings is possible thanks to special outer contour of runner plates
Pivotable cage reduced in outer diameter
Bearings fitted in housing and sealing or cover discs always central to drive shaft
All other features of LBCR linear bearings are the same for the angle-adjustable LBCD design
LBCD linear bearings must be secured in the axial plane
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
Gerelateerde Links
- Ewellix Makers in Motion Bearing Unit LUHR 30-2LS LUNE Series
- Ewellix Makers in Motion Bearing Unit LUHR 20-2LS LUNE Series
- Ewellix Makers in Motion Bearing Unit LUHR 16-2LS LUNE Series
- Ewellix Makers in Motion Bearing Unit LUHR 12-2LS LUHR Series
- Ewellix Makers in Motion Bearing Unit LUHR 25-2LS LUHR Series
- Ewellix Makers in Motion Bearing Unit LUNE12 D-2LS LUNE Series
- Ewellix Makers in Motion LBBR 30-2LS Bearing with 30 mm ID 40 mm OD 3150 N 2700 N
- Ewellix Makers in Motion LBCR25 D-2LS Bearing with 25 mm ID 40 mm OD 3350 N 3350 N