Tedea Huntleigh Compression Load Cell 3000kg, 15V dc, IP67

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Models 616 is tension compression load cells which share the same dimensions. Humidity-resistant coating and shielded cables enable these load cells to be used in harsh environments while maintaining their operating specifications. The additional sense wires compensate for changes in lead resistance due to temperature change and/or cable extension. Ideally suited for lever conversions, hanging scales, force measurement and a wide range of other industrial applications. Model 616 is made from stainless steel and has bonded covers for additional protection (except 50 kg).

xCapacities 50–1000 kg
stainless steel construction
For use in tension or compression
6-wire (sense) circuit
Output standardised to ±0.1%
Applications
Hopper (tank weighing)
Hybrid scales
Belt weighing
Lever arm conversions
Material testing machines
Vibrations filling equipment
Dynamometers

Specificaties
Kenmerk Waarde
Force Measured Compression
Force/ Load Measurement Range 3000kg
Maximum Excitation Voltage 15V dc
Output At Rated Load 2mV/V
Housing Material Stainless Steel
IP Rating IP67
Terminal Type Cable
Overall Height 80mm
Overall Width 62.1mm
Overall Depth 18mm
Minimum Operating Temperature -30 (Safe) °C, -10 (Compensated) °C
Maximum Operating Temperature +40 (Compensated) °C, +70 (Safe) °C
2 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
185,16
(excl. BTW)
224,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 185,16
Related Products
A single point, 20kg load cell designed for ...
Description:
A single point, 20kg load cell designed for use in high speed check weighers/fillers or applications under continuous shock and vibration conditions. Output impendence 350ΩSafe overload 150% rated capacityUltimate overload 300% rated capacity.
Low capacity, high precision, aluminium, single point load ...
Description:
Low capacity, high precision, aluminium, single point load cell. A special humidity-resistant protective coating ensures long-term reliability. Output impendence 350ΩSafe overload 150% rated capacityUltimate overload 250% rated capacityCable type 4 Wire; 28 AWG; Spiral Shield; PVC Jacket.
Output impendence 350ΩInput Impedance 400 ±20ΩSafe overload 150% ...
Description:
Output impendence 350ΩInput Impedance 400 ±20ΩSafe overload 150% rated capacityUltimate overload 300% rated capacityFor use in tension and compression6 wire (sense) circuitBridge signal conditioners available separatelyFor Output signal conditioners see (stock no. 455-5043)Dimensions 62 x 80 x 18mm The additional ...
1042 series low profile single point load cell ...
Description:
1042 series low profile single point load cell designed for direct mounting of low cost weighing platforms. Has a humidity resistant protective coating, which assures long term stability over the entire compensated temperature range. Compensated Temperature Range -10 to +40°COutput ...