Fluke 705 Loop Calibrator Battery 30V

RS-stocknr.:: 325-4777
Artikelnummer Distrelec:: 176-80-408
Fabrikantnummer:: 0665091
Fabrikant:: Fluke

Subtotaal (1 eenheid)*

€ 1.166,55

(excl. BTW)

€ 1.411,53

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Beperkte voorraad

10 resterend, klaar voor verzending
52 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 1.166,55

*prijsindicatie

RS-stocknr.:: 325-4777
Artikelnummer Distrelec:: 176-80-408
Fabrikantnummer:: 0665091
Fabrikant:: Fluke

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke
	Product Type	Loop Calibrator
	Model Number	705
	Accuracy	±0.025 %
	Resolution	0.001 mA
	Battery Type	AAA
	Battery Life	18h
	Power Source	Battery
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	55°C
	Height	164mm
	Weight	340g
	Standards/Approvals	No
	Width	75 mm
	Length	47mm
	Hazardous Area Certification	No
	Safety Category Voltage	30V

	Alles selecteren
	Merk Fluke
	Product Type Loop Calibrator
	Model Number 705
	Accuracy ±0.025 %
	Resolution 0.001 mA
	Battery Type AAA
	Battery Life 18h
	Power Source Battery
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 55°C
	Height 164mm
	Weight 340g
	Standards/Approvals No
	Width 75 mm
	Length 47mm
	Hazardous Area Certification No
	Safety Category Voltage 30V

Land van herkomst:: CN

FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091

Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit's tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it's protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings.

Features & Benefits

• Helpful for linearity checks thanks to its dedicated push button for 25% increments

• Switchable between stepped or ramped output to meet your application needs

• 9V battery is easy to change without opening the case and affecting the calibration seal

• 'Span check' function gives you speedily calculated results for zero and span measurements

Applications

• Test and measurement devices

• Research and development labs

• Electronics servicing

What's the benefit of this product's internal loop supply?

This product's 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU.

Fluke 705 Loop Calibrator

Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool.

Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips.

Features and Benefits:

• 0.02% accuracy

• 24 V loop supply with mA measure

• Simultaneous mA and % of span display

• Selectable step/ramp outputs

• mA sourcing, simulation and measurement

• Compact case and protective holster

• Quick battery replacement

FAQ's

What is a current loop calibrator?

Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.

How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.

Supplied with

9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data