RS PRO Mains Test Block, 440V ac, 16A Quick Connector
- RS-stocknr.:
- 811-2274
- Artikelnummer Distrelec:
- 304-51-278
- Fabrikant:
- RS PRO
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 86,93
(excl. BTW)
€ 105,19
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 9 stuk(s) klaar voor verzending
- 55 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 24 stuk(s) vanaf 19 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 11 | € 86,93 |
| 12 - 24 | € 81,89 |
| 25 + | € 81,11 |
*prijsindicatie
- RS-stocknr.:
- 811-2274
- Artikelnummer Distrelec:
- 304-51-278
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Voltage | 440V ac | |
| Product Type | Mains Test Block | |
| Sub Type | Power Connector | |
| Circuit Type | Current | |
| Current | 16A | |
| Cord Included | No | |
| Contact Configuration | On-Off | |
| Connector Type | Quick Connector | |
| Colour | Red | |
| Depth | 160mm | |
| Height | 49mm | |
| Standards/Approvals | No | |
| Width | 100mm | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Voltage 440V ac | ||
Product Type Mains Test Block | ||
Sub Type Power Connector | ||
Circuit Type Current | ||
Current 16A | ||
Cord Included No | ||
Contact Configuration On-Off | ||
Connector Type Quick Connector | ||
Colour Red | ||
Depth 160mm | ||
Height 49mm | ||
Standards/Approvals No | ||
Width 100mm | ||
- Land van herkomst:
- GB
RS PRO Mains Test Block
This three phase quicktest QT3 test power Connector is a compact, robust, power connector designed for temporary, safe and efficient connection of unterminated cables to 440Vac three-phase power supplies. The QT3 has a maximum rating of 16 amps.
The QT3 is designed for use in applications including manufacturing, test and repair, calibration, measurement, and anywhere a fast, safe and non-permanent connection to a three-phase power supply is required.
Connection to the Quickest takes just a few seconds. Simply open the lid, which automatically isolates the three phase supply, insert each bare cable end by pressing the five colour-coded piano key cable clips, and then close the lid to complete the circuit between the device being tested and the main electrical power supply. Opening the lid again isolates the supply source so the conductors can be rapidly removed.
Features and Benefits:
• Quick release
• Colour coded cable clips
• No sockets or screws
• Each phase protected with 16 amp fuses as standard
• Each phase fitted with individual neon indicator lamps when live
• Bench mounted or free standing
• Maximum rating 16 Amps 440 Vac
• Operating temperature -10°C to +40°C
Dimensions (HxWxL):
49mm x 100mm x 160mm
Note
Duty Cycle (per 10 minutes):
16 Amps - 10%
13 Amps - 25%
10 Amps - 40%
7 Amps - 80%
5 Amps - 100%
Please also note that this three phase test block is not supplied with a power cord.
16 Amps - 10%
13 Amps - 25%
10 Amps - 40%
7 Amps - 80%
5 Amps - 100%
Please also note that this three phase test block is not supplied with a power cord.
Warning
Always connect the earth connection for safety.
Always use in conjunction with an RCD; for a suitable device, consider RS 825-6093
Always use in conjunction with an RCD; for a suitable device, consider RS 825-6093