Druck DPI705EIS G1/8 Manometer With 1 Pressure Port/s, Max Pressure Measurement 0.35 bar, RSCAL

RS-stocknr.:: 201-3019
Fabrikantnummer:: DPI705EIS-2-03G-P1-H1-U0-OP0
Fabrikant:: Druck

Druck DPI705EIS G1/8 Manometer With 1 Pressure Port/s, Max Pressure Measurement 0.35 bar, RSCAL

Subtotaal (1 eenheid)*

€ 1.092,57

(excl. BTW)

€ 1.322,01

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

1 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 1.092,57

*prijsindicatie

RS-stocknr.:: 201-3019
Fabrikantnummer:: DPI705EIS-2-03G-P1-H1-U0-OP0
Fabrikant:: Druck

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Druck
	Accuracy	±0.05 %
	Product Type	Manometer
	Number of Pressure Ports	1
	Maximum Pressure Measurement	0.35bar
	Minimum Pressure Measurement	-25mbar
	Pressure Port Type	G1/8
	Leak Testing	Yes
	Minimum/Maximum Recordings	Yes
	Model Number	DPI705EIS
	Intrinsically Safe	Yes
	IP Rating	IP54
	Power Source	4 x AA
	Minimum Operating Temperature	-10°C
	Battery Type	AA
	Maximum Overpressure	1400bar
	Maximum Operating Temperature	50°C
	Display Type	LCD Backlight
	Battery Life	1year
	Length	200mm
	Standards/Approvals	CE, RCM, RoHS, UL 61010-1
	Width	95mm
	Height	43mm
	Weight	563g
	Hazardous Area Certification	ATEX
	Calibrated	RSCAL

	Alles selecteren
	Merk Druck
	Accuracy ±0.05 %
	Product Type Manometer
	Number of Pressure Ports 1
	Maximum Pressure Measurement 0.35bar
	Minimum Pressure Measurement -25mbar
	Pressure Port Type G1/8
	Leak Testing Yes
	Minimum/Maximum Recordings Yes
	Model Number DPI705EIS
	Intrinsically Safe Yes
	IP Rating IP54
	Power Source 4 x AA
	Minimum Operating Temperature -10°C
	Battery Type AA
	Maximum Overpressure 1400bar
	Maximum Operating Temperature 50°C
	Display Type LCD Backlight
	Battery Life 1year
	Length 200mm
	Standards/Approvals CE, RCM, RoHS, UL 61010-1
	Width 95mm
	Height 43mm
	Weight 563g
	Hazardous Area Certification ATEX
	Calibrated RSCAL

Datasheet DPI-705E Series

Land van herkomst:: GB

Druck Manometer, 0.35 bar Maximum Pressure, -25m bar Minimum Pressure - DPI705EIS-2-03G-P1-H1-U0-OP0

This manometer is a portable pressure-measurement instrument designed for field and industrial environments. It provides precise differential and absolute readings for pressure verification and leak testing while operating within a typical ambient range. The unit features an LCD backlight for readability and runs on readily available AA batteries, making it suitable for technicians working on-site where intrinsically safe operation is required.

Features and Benefits:

• ±0.05% accuracy ensures precise measurement for diagnostic tasks
• ATEX intrinsic safety permits use in hazardous atmospheres
• IP54 rating protects against dust ingress and water splashes
• 1400 bar overpressure protection guards the sensor during misuse
• G1/8 pressure port allows straightforward connection to test rigs

Applications

• Suitable for on-site leak testing of pneumatic systems
• Ideal for gas-pressure verification in hazardous zones
• Used with portable calibration rigs for instrument checks
• Can be used for maintenance checks in process plants
• Suitable for contractors performing pressure troubleshooting

What power arrangement does the instrument use?

It is powered by four AA batteries providing portable operation and a nominal battery life of 1 year.

Which certification allows operation in potentially explosive atmospheres?

It holds ATEX approval and is designed to be intrinsically safe for use in such areas.

What pressure range can technicians expect for routine measurements?

The device measures from -25 mbar up to 0.35 bar for standard pressure tasks.

How does the display support use in low-light conditions?

The unit includes an LCD backlight to maintain legibility in dim environments.

Which standards and approvals apply to electrical safety and environmental compliance?

It meets CE, RCM and RoHS requirements and conforms to UL 61010-1.

Note

Why choose Druck?
What began in 1972 as a small business in Leicester, UK, Druck has grown into a global pressure-measurement business recognised as a world leader, delivering high quality piezo-resistive pressure sensors and test and calibration instruments to a wide range of applications for customers across the globe.
Druck is one of the only organisations to control the whole manufacturing process from silicon to final product. All products are high-quality, developed from the in-house (UK), raw processing of silicon to delivering the final product.
With Druck, you can be sure of quality, accuracy and reliability. We are Druck. We deliver peace of mind.