Digitron 2000P Differential Manometer With 2 Pressure Port/s, Max Pressure Measurement 7 bar

Subtotaal (1 eenheid)*

€ 462,15

(excl. BTW)

€ 559,20

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Bestellingen onder € 75,00 (excl. BTW) € 5,95.
Op voorraad
  • Plus verzending 7 stuk(s) vanaf 16 februari 2026
  • Plus verzending 18 stuk(s) vanaf 16 februari 2026
  • Plus verzending 1 stuk(s) vanaf 10 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 462,15

*prijsindicatie

RS-stocknr.:
313-0233
Fabrikantnummer:
2023P7-7BAR
Fabrikant:
Digitron
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Digitron

Product Type

Manometer

Accuracy

±0.15% + 0.0105 bar + 1 Digit

Number of Pressure Ports

2

Maximum Pressure Measurement

7bar

Minimum Pressure Measurement

0bar

Pressure Port Type

Differential

Leak Testing

Yes

Minimum/Maximum Recordings

Yes

Model Number

2000P

IP Rating

IP67

Battery Type

AA

Minimum Operating Temperature

-10°C

Maximum Overpressure

10bar

Maximum Operating Temperature

50°C

Battery Life

200h

Display Type

LCD

Length

155mm

Standards/Approvals

No

Width

67 mm

Height

40mm

Weight

180g

Hazardous Area Certification

No

Vrijgesteld

Land van herkomst:
GB

Digitron 2023P, 0-7 bar, Differential Manometer


The Digitron 2023P handheld differential manometer takes pressure measurements over a wide range of pressures. It is of robust design, to IP67 with hose connected, and operates between -10 and +50 °C. Features include a backlit display, reinforced silicone keypad and separate battery compartment. The 2023P filters low-level fluctuations to provide a stable display when measuring unsteady pressure levels.

Accuracy 0.15% rdg + 0.1fs + digit (+20 to +30 °C), 0.15% rdg + 0.15% fs digit (elsewhere)

2 inputs via 1/8 BSP (4mm id, 6mm od hose)

Preset engineering units -mbar, Pa, inH2O, mH2O, inHg, mHg, kPa, PSI

Min/Max recorder and range lock

Dimensions 155 x 67 x 40 mm

Weight 180g

Digitron 2000P Series - Manometers


Hand-held manometers series. Features found in the range include:

Robust design. IP67 with hose connected, operates between -10 and +50°C, backlit 12.7mm display, reinforced silicone key pad and separate battery compartment

Accuracy: 0.15% rdg + 0.1fs +digit (+20 to +30°C); 0.15% rdg + 0.15% fs digit (elsewhere)

Connection: 2 inputs via 1/8 BSP (4mm id, 6mm od hose)

Zeroing absolute user input of local barometric conditions for additional accuracy

Preset engineering units - mbar, Pa, inH²O, mH²O, inHg, mHg, kPa, PSI

Min/Max & Average recording, range lock & selectable auto off

Smoothing. Filters low level fluctuations to provide a stable display when measuring unsteady pressure levels

Automatic leak testing. Instrument measures pressure leakage from a system over a user specified test duration time. At the end of the test time a Pass/Fail message is displayed and logged to memory

Long battery life. Typically 200 hours (requires 2 x AA batteries, stock no 591-225)

Dimensions: 155 x 67 x 40mm, weight 180g

All instruments are supplied with instruction manual.

Model 202xP and 208xP additional features:


7 pre-set engineering units

Range lock, Min / Max recorder

Smoothing

Model 208xP additional features:


Automatic leak testing

250 memory logging on demand or at preset intervals

Min/Max and averaging recorder

4 digit reference coding of logged data

Cal function zero

Infra red serial interface to connect via DigiLink interface direct to a serial printer or PC

User-definable scaling

Note

1. Requires 2xAA batteries (please see 744-2199 ).
2. Particular care should be taken not to over pressure this device as this may rupture the sensor membrane. This is not covered by the manufacturers warranty.
3. The differential / gauge instruments will only measure positive pressures i.e. positive pressure applied to the positive port, or negative pressure applied to the negative port.
4. Not suitable for use with corrosive substances or cyclic hydrocarbons, e.g. motor oil, transmission fluid and freon. To use these instruments with these fluid components, isolation must be provided in the form of a buffer, such as mineral oil or dry air.

Supplied with

Instruction manual

Gerelateerde Links