Legris High Pressure Ball Valve Brass 1/4 in G 2 Way

  • RS-stocknr. 282-6501
  • Fabrikantnummer 0432 07 13
  • Fabrikant Legris
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

In-Line Valves

Valve lockable in open or closed position
When plate fixed to valve body and plate attached to valve stem are padlocked together, valve handle cannot be operated

//media.rs-online.com/t_line/L282650-01.gif
//media.rs-online.com/t_line/L283016-01.gif

Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Specificaties
Kenmerk Waarde
Attachment Type Threaded
Threaded Connection 1/4 in G
Body Material Brass
Thread Size 1/4in
Safe for Use With Water
Maximum Working Pressure 40 bar
Connection Size mm 8mm
Connection Size inch 1/4in
Type 2 Way
7 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
55,55
(excl. BTW)
67,22
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 55,55
5 - 9
€ 53,85
10 +
€ 52,11
Related Products
A 2/2 way ball valve with a hand ...
Description:
A 2/2 way ball valve with a hand lever and female thread at both ends. Available in a range of thread sizes from G G1. Female thread with hand leverAir and water operating mediumsBrass housingLarge operating temperature range of -20 ...
Mountable in-line ball valve for closing fluid systems ...
Description:
Mountable in-line ball valve for closing fluid systems with a simple quarter turn of the handle. full flowOptimum sealing due to compensating "O" ringsExcellent resistance to scaling due to ball seal configuration.
Brass sphere valves for water systems and water ...
Description:
Brass sphere valves for water systems and water distribution.Available with a flat red steel handle.
RS Brand reduced-bore quarter-turn stainless steel ball valves ...
Description:
RS Brand reduced-bore quarter-turn stainless steel ball valves for the control of flow. Available in a variety of sizes. Reduced port, 1/4" - 3" (DN8 - DN80)W.P: 1000WOG (PN63)W.T: -20°C to 200°C (-4°F to 392°F)Investment castingBlow-out proof stemAnti-static device (option)Locking ...