RS PRO 1 Matrix Board FR2 1.02 mm Holes, 220 mm 100mm
- RS-stocknr.:
- 159-6322
- Artikelnummer Distrelec:
- 304-02-702
- Fabrikant:
- RS PRO
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 17,70
(excl. BTW)
€ 21,42
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 9 stuk(s) vanaf 27 april 2026
- Plus verzending 58 stuk(s) vanaf 27 april 2026
- Plus verzending 40 stuk(s) vanaf 04 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 17,70 |
| 10 - 24 | € 16,72 |
| 25 - 49 | € 15,48 |
| 50 - 99 | € 13,17 |
| 100 + | € 10,97 |
*prijsindicatie
- RS-stocknr.:
- 159-6322
- Artikelnummer Distrelec:
- 304-02-702
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Matrix Board | |
| Number of Sides | 1 | |
| Length | 220mm | |
| Width | 100mm | |
| Board Material | Synthetic Resin Bonded Paper | |
| Hole Diameter | 1.02mm | |
| FR Material Grade | FR2 | |
| Copper Thickness | 35μm | |
| Standards/Approvals | DIN 41494, DIN 41612 | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Matrix Board | ||
Number of Sides 1 | ||
Length 220mm | ||
Width 100mm | ||
Board Material Synthetic Resin Bonded Paper | ||
Hole Diameter 1.02mm | ||
FR Material Grade FR2 | ||
Copper Thickness 35μm | ||
Standards/Approvals DIN 41494, DIN 41612 | ||
- Land van herkomst:
- GB
RS PRO Single-Sided DIN 41612 Matrix Board FR2 with 1.02 mm Holes, 2.54 x 2.54 mm Pitch, 220 x 100 mm
Choose this single-sided Eurocard matrix board from RS PRO when you need a low-cost prototype circuit board to securely layout your components. You can use it primarily to wire general discrete components, which you can find applied in amplifiers and electronic products using large amounts of current. It's also useful when you need to connect a number of common bus or signal lines.
The board conforms to DIN 41494 standards specifying practices for electronic equipment and mechanical structures of 19-inch series, which means you can use it with the standard rack-based electrical systems and card frames. It's also compatible with Microbus backplane connectors.
Matrix boards allow you to build a prototype PCB and keep all the parts of your circuit easily accessible. You can also use them as a pre-design layout matrix you can then copy onto a standard PCB.
Features and Benefits
• Synthetic resin bonded paper base material
• DIN 41612 connection
• Copper thickness of 35 μm
• Dimensions of 220 x 100 mm
• FR2 material grade
• Hole diameter of 1.02 mm
• Hole pitch of 2.54 x 2.54 mm
• Single-sided
Gerelateerde Links
- RS PRO 1 Matrix Board FR2 1.02 mm Holes, 160 mm 100 mm
- RS PRO 1 Matrix Board FR2 With 34 x 64 1.02 mm Holes, 160 mm 100 mm
- RS PRO 1 Matrix Board FR4 1.02 mm Holes, 220 mm 100 mm
- Vero Technologies 1 Matrix Board FR4 With 75 x 86 1.02 mm Holes, 233.4 mm 220 mm
- Vero Technologies Matrix Board FR2 With 58 x 42 1.3 mm Holes, 148.08 mm 114.3 mm
- Vero Technologies 1 Matrix Board FR4 With 54 x 34 1.02 mm Holes, 160 mm 100 mm
- Vero Technologies Matrix Board FR4 With 42 x 38 1.02 mm Holes 160 mm 100 mm
- Vero Technologies 1 Matrix Board FR4 With 52 x 85 1.02 mm Holes, 233.4 mm 160 mm