ABB SMISSLINE TP S400M Miniature Circuit Breaker, 2-Pole, 10A, Type K, 240V AC, 10 kA Breaking Capacity

RS-stocknr.:: 246-2586
Fabrikantnummer:: 2CCS572001R0427
Fabrikant:: ABB

ABB SMISSLINE TP S400M Miniature Circuit Breaker, 2-Pole, 10A, Type K, 240V AC, 10 kA Breaking Capacity

Bekijk alle MCBs

Subtotaal (1 eenheid)*

€ 93,93

(excl. BTW)

€ 113,66

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

1 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 93,93

*prijsindicatie

RS-stocknr.:: 246-2586
Fabrikantnummer:: 2CCS572001R0427
Fabrikant:: ABB

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	ABB
	Number of Poles	2
	Product Type	Miniature Circuit Breaker
	Current Rating	10A
	Tripping Characteristics	Type K
	Rated AC Voltage	240V
	Breaking Capacity	10kA
	Range	SMISSLINE TP
	Series	S400M
	Terminal Type	Screw
	IP Rating	IP20
	Standards/Approvals	IEC/EN 60947-2
	Width	36mm
	Depth	75mm
	Height	91mm
	Tripping Mechanism	Electromechanic, Thermal
	Reset Actuator Type	I/O Actuator

	Alles selecteren
	Merk ABB
	Number of Poles 2
	Product Type Miniature Circuit Breaker
	Current Rating 10A
	Tripping Characteristics Type K
	Rated AC Voltage 240V
	Breaking Capacity 10kA
	Range SMISSLINE TP
	Series S400M
	Terminal Type Screw
	IP Rating IP20
	Standards/Approvals IEC/EN 60947-2
	Width 36mm
	Depth 75mm
	Height 91mm
	Tripping Mechanism Electromechanic, Thermal
	Reset Actuator Type I/O Actuator

Datasheet - 2CCS572001R0427

Land van herkomst:: CH

ABB S400M Series Miniature Circuit Breaker, 10A Current, 240V Rated AC Voltage - 2CCS572001R0427

This miniature circuit breaker provides overcurrent protection for low-voltage installations, combining thermal and electromechanical trip actions to interrupt fault currents. Designed for panel or distribution board use, it conforms to recognised switching device standards and is intended for environments where Compact protective devices are required.

Features and Benefits:

• 10A rating delivers controlled protection for light circuits
• 10kA breaking capacity limits fault energy during short circuits
• Type K tripping provides defined selective response to inrushes
• Screw terminals enable secure conductor clamping under vibration
• Reset I/O actuator allows clear manual on/off operation

Applications

• Suitable for protecting lighting circuits in commercial premises
• Ideal for motor feeder protection with moderate inrush currents
• Used with dual-pole isolation requirements in distribution boards
• Can be used for control circuits requiring manual reset action

What tripping mechanisms are combined to detect faults?

It employs a thermal element for overloads and an electromechanical release for short-circuit disconnection.

Which enclosure ingress level applies to panel use?

The protection rating corresponds to IP20, suitable for installation inside enclosures or distribution panels.

How is pole configuration arranged for load interruption?

Two poles are provided to simultaneously switch both conductors in single-phase systems.

What physical footprint considerations affect mounting density?

The unit is designed with a 36mm width to enable Compact arrangement on standard mounting rails.