Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	3M
	Product Type	Metallic Tape
	Backing Material	Dead Soft Copper Foil
	Width	25mm
	Thickness	101μm
	Length	16.5m
	Conductivity	Yes
	Colour	Brown
	Adhesive Material	Acrylic
	Tensile Strength	25lb/in
	Standards/Approvals	No

	Alles selecteren
	Merk 3M
	Product Type Metallic Tape
	Backing Material Dead Soft Copper Foil
	Width 25mm
	Thickness 101μm
	Length 16.5m
	Conductivity Yes
	Colour Brown
	Adhesive Material Acrylic
	Tensile Strength 25lb/in
	Standards/Approvals No

Datasheet - 7100033032

Land van herkomst:: CH

3M Metallic Tape, 25mm Width, 0.101mm Thickness - 7100033032

This metallic tape provides a conductive adhesive solution for electrical and Electronic Assembly tasks, combining a soft copper backing with an acrylic adhesive to manage shielding and earthing in industrial contexts. It is presented on a roll suitable for application in automation, electrical and mechanical environments where conductive continuity and conformability are required.

Features and Benefits:

• Dead soft copper foil ensures close surface conformity for contact
• Conductive adhesive gives electrical continuity across joints
• High tensile resistance supports handling during installation
• Thin foil thickness improves flexibility on tight radii
• Generous roll length reduces changeovers on production lines

Applications

• Suitable for EMI shielding in control cabinets and enclosures
• Ideal for creating earthing pathways on sheet metal panels
• Used for repair and shielding of electronic assemblies
• Can be used for manual application in prototype development
• Used with cable harnesses for localised interference control

How does the tape behave when applied around curved surfaces?

The copper foil is dead soft, allowing it to mould to contours and maintain contact without spring-back.

What mechanical load can the tape withstand during handling?

The material exhibits a tensile strength of 25 lb/in, providing adequate resistance to tearing during fitting operations.

What thickness should I expect for close-contact applications?

The foil has a thickness of 0.101mm, offering a low-profile conductive layer suitable for tight clearances.

How long is each roll for continuous use on-site?

Each roll contains 16.5 m of tape, allowing extended runs before replacement.

What type of adhesive base is used and why is it chosen?

An acrylic adhesive is used for stable adhesion across typical industrial surfaces and to maintain conductive performance.

3M Yes Metallic Tape, 25mm x 16.5 m, Brown

Alternatief