Honeywell Technologies Roller Lever Micro Switch, Solder Terminal, 6A, 250 V ac, SPDT, IP00

RS-stocknr.:: 205-6082
Fabrikantnummer:: ZW50F15FD1
Fabrikant:: Honeywell

Honeywell Technologies Roller Lever Micro Switch, Solder Terminal, 6A, 250 V ac, SPDT, IP00

Subtotaal (1000 eenheden, in een doos van 1000)*

€ 10.535,00

(excl. BTW)

€ 12.747,00

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 03 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Doos*
1000 +	€ 10,535	€ 10.535,00

*prijsindicatie

RS-stocknr.:: 205-6082
Fabrikantnummer:: ZW50F15FD1
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Micro Switch
	Actuator Type	Roller Lever
	Terminal Type	Solder
	Switch Contact Current	6A
	Housing Material	Polybutylene Terephthalate
	Contact Configuration	SPDT
	IP Rating	IP00
	Operating Force	203g
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	120°C
	Contact AC Voltage	250V ac
	Microswitch Type	Subminiature
	Series	ZW
	Width	6.4mm
	Standards/Approvals	CQC, cUL, ENEC, RoHS, UL
	Mechanical Life	1000000min
	Length	19.8mm
	Hazardous Area Certification	CQC, cUL, ENEC, RoHS, UL
	Depth	9.25mm

	Alles selecteren
	Merk Honeywell
	Product Type Micro Switch
	Actuator Type Roller Lever
	Terminal Type Solder
	Switch Contact Current 6A
	Housing Material Polybutylene Terephthalate
	Contact Configuration SPDT
	IP Rating IP00
	Operating Force 203g
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 120°C
	Contact AC Voltage 250V ac
	Microswitch Type Subminiature
	Series ZW
	Width 6.4mm
	Standards/Approvals CQC, cUL, ENEC, RoHS, UL
	Mechanical Life 1000000min
	Length 19.8mm
	Hazardous Area Certification CQC, cUL, ENEC, RoHS, UL
	Depth 9.25mm

Land van herkomst:: TW

Honeywell Series ZW Micro Switch, 6A Switch Contact Current, Roller Lever Actuator Type - ZW50F15FD1

This micro switch is a Compact electromechanical limit device designed to detect position changes and provide a single-pole changeover contact for control and safety circuits in industrial equipment. It is fitted with a roller lever actuator for consistent mechanical actuation and a solder-style Terminal for PCB or wiring integration, making it suitable for applications requiring tactile switching under defined environmental and electrical conditions.

Features and Benefits:

• Operating range from -40°C to 120°C ensures wide thermal tolerance
• Rated switching current of 6A at 250V AC supports moderate loads
• Mechanical endurance of 1 million cycles minimises replacement frequency
• SPCO contact arrangement simplifies normally open/closed signalling
• Polybutylene terephthalate housing offers electrical insulation and stability

Applications

• Suitable for limit detection in automated assembly lines
• Ideal for position sensing in electrical control panels
• Can be used for safety interlocks on mechanical drives
• Used with PCB-mounted circuits requiring solder terminals
• Suitable for tactile actuation in instrumentation enclosures

What type of terminals does it use for board mounting?

It employs solder terminals intended for direct PCB soldering or hard-wired connections.

Which approvals indicate suitability for industrial deployment?

The component carries multiple approvals including cUL, ENEC, RoHS, UL and CQC, indicating conformity with several recognised standards.

How does the actuator style affect installation options?

The roller lever actuator provides a low-friction contact point that tolerates lateral movement and is suitable where repeated mechanical engagement occurs.

What limits should be observed for safe thermal operation?

The device is specified to operate down to -40°C and up to 120°C, installations should maintain ambient conditions within this range.