Honeywell Roller Lever Micro Switch, Right Angle PCB Terminal Terminal, 100mA, 125 V ac, 60 V dc, SPDT, IP40

RS-stocknr.:: 205-6090
Fabrikantnummer:: ZX10E50F01
Fabrikant:: Honeywell

Honeywell Roller Lever Micro Switch, Right Angle PCB Terminal Terminal, 100mA, 125 V ac, 60 V dc, SPDT, IP40

Subtotaal (1 doos van 1000 eenheden)*

€ 3.235,00

(excl. BTW)

€ 3.914,00

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 13 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Doos*
1000 +	€ 3,235	€ 3.235,00

*prijsindicatie

RS-stocknr.:: 205-6090
Fabrikantnummer:: ZX10E50F01
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Micro Switch
	Actuator Type	Roller Lever
	Terminal Type	Right Angle PCB Terminal
	Housing Material	Polyamide
	Contact Configuration	SPDT
	IP Rating	IP40
	Operating Force	150g
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Contact AC Voltage	125V ac
	Microswitch Type	Subminiature
	Contact DC Voltage	60V dc
	Series	ZX
	Length	12.8mm
	Depth	6.5mm
	Width	5.8mm
	Standards/Approvals	UL, CQC, cUL, ENEC, RoHS
	Hazardous Area Certification	NO
	Mechanical Life	3000000min

	Alles selecteren
	Merk Honeywell
	Product Type Micro Switch
	Actuator Type Roller Lever
	Terminal Type Right Angle PCB Terminal
	Housing Material Polyamide
	Contact Configuration SPDT
	IP Rating IP40
	Operating Force 150g
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Contact AC Voltage 125V ac
	Microswitch Type Subminiature
	Contact DC Voltage 60V dc
	Series ZX
	Length 12.8mm
	Depth 6.5mm
	Width 5.8mm
	Standards/Approvals UL, CQC, cUL, ENEC, RoHS
	Hazardous Area Certification NO
	Mechanical Life 3000000min

Land van herkomst:: CN

Honeywell Series ZX Micro Switch, 125V Contact AC Voltage, 150g Operating Force - ZX10E50F01

This micro switch is a Compact electromechanical device designed to detect and change state in control and sensing circuits within automation and electronic systems. Fitted with a roller lever actuator and right‑angle PCB terminals, it is intended for installation where a small form‑factor switch and clear mechanical feedback are required. The component operates across a wide temperature range and complies with recognised safety and environmental standards for industrial use.

Features and Benefits:

• Roller lever actuator enables smooth mechanical engagement
• Right‑angle PCB terminals simplify board‑level mounting
• SP single‑changeover contact supports straightforward circuit switching
• 125V AC and 60V DC ratings allow mixed‑voltage applications
• 100 mA contact current suits low‑power signal control
• 150 g operating force limits unintended actuation

Applications

• Suitable for limit detection in conveyor and actuator assemblies
• Ideal for user‑input switches on Compact control panels
• Used for position sensing in small electromechanical drives
• Can be used for signal changeover on PCB‑mounted relay logic
• Used with instrumentation where space‑constrained switching is required

What materials contribute to the switch’s environmental resistance?

The enclosure is MADE from polyamide, which provides electrical insulation and durability against routine handling and installation stresses.

How long can the switch operate in repetitive use before mechanical wear is expected?

It is specified for a mechanical life of 3 million cycles under standard operating conditions.

Which approvals indicate suitability for international projects?

It carries UL, cUL, ENEC and CQC recognitions and meets RoHS environmental restrictions.

What are the permissible ambient temperatures for reliable operation?

It is rated to operate between −40 °C and 85 °C for cold‑start and elevated‑temperature environments.