Honeywell Roller Lever Micro Switch, Solder Terminal, 10.1A, 250 V, SPDT, IP40

RS-stocknr.:: 205-6140
Fabrikantnummer:: ZM190G10F01
Fabrikant:: Honeywell

Honeywell Roller Lever Micro Switch, Solder Terminal, 10.1A, 250 V, SPDT, IP40

Subtotaal (1 doos van 1000 eenheden)*

€ 2.308,00

(excl. BTW)

€ 2.793,00

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk	Per Doos*
1000 +	€ 2,308	€ 2.308,00

*prijsindicatie

RS-stocknr.:: 205-6140
Fabrikantnummer:: ZM190G10F01
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Actuator Type	Roller Lever
	Product Type	Micro Switch
	Terminal Type	Solder
	Housing Material	PBT
	Contact Configuration	SPDT
	IP Rating	IP40
	Operating Force	355g
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Microswitch Type	Subminiature
	Contact AC Voltage	250V
	Standards/Approvals	RoHS, UL, CE, CQC, CQC to GB 15092.1, cUL to UL 61058-1, ENEC to IEC 61058-1, REACH
	Depth	10.2mm
	Mechanical Life	50000min
	Length	19.8mm
	Hazardous Area Certification	NO
	Width	6.4mm
	Series	ZM1

	Alles selecteren
	Merk Honeywell
	Actuator Type Roller Lever
	Product Type Micro Switch
	Terminal Type Solder
	Housing Material PBT
	Contact Configuration SPDT
	IP Rating IP40
	Operating Force 355g
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Microswitch Type Subminiature
	Contact AC Voltage 250V
	Standards/Approvals RoHS, UL, CE, CQC, CQC to GB 15092.1, cUL to UL 61058-1, ENEC to IEC 61058-1, REACH
	Depth 10.2mm
	Mechanical Life 50000min
	Length 19.8mm
	Hazardous Area Certification NO
	Width 6.4mm
	Series ZM1

Land van herkomst:: CN

Honeywell ZM1 Series Micro Switch, 10.1A Switching Current, Roller Lever Actuator Type - ZM190G10F01

This micro switch is a Compact electromechanical device designed to provide precise switching in control and sensing applications. Fitted with a roller lever actuator and solder terminals, it is suited to installations requiring a low-profile switching element that can handle moderate currents within controlled environments.

Features and Benefits:

• Roller lever actuator enables smooth mechanical engagement and repeatable actuation
• Single-pole changeover contact supports flexible circuit switching arrangements
• Rated for 10.1A contact current to handle higher load switching
• Operates across -40°C to 125°C to suit varied thermal conditions
• IP40 enclosure offers Basic ingress protection in indoor installations
• Mechanical life of 400 cycles provides defined service expectancy

Applications

• Suitable for limit-switching on small automated machinery
• Ideal for panel-mounted position sensing in electrical cabinets
• Used with relay logic for industrial control circuits requiring a Compact switch
• Can be used for position detection in electromechanical assemblies

What Terminal type is provided for electrical connection?

Connections are via solder terminals designed for secure PCB or wire attachment using soldering processes.

Which approvals indicate suitability for regulated equipment?

The component carries multiple certifications including RoHS, UL, CE, ENEC and CQC listings that align with common regulatory requirements.

How does the contact configuration affect wiring options?

The single-pole changeover arrangement permits one input to be routed to either of two outputs depending on actuator position, simplifying Basic control schemes.

What environmental limitations should be considered for deployment?

The switch offers IP40 protection, so it is intended for environments without significant dust ingress or moisture exposure.