Honeywell Roller Lever Micro Switch, Quick Connect Terminal, 10 A, 125 V ac, SPCO

RS-stocknr.:: 820-7482
Fabrikantnummer:: V7-1B17D8-263
Fabrikant:: Honeywell

Honeywell Roller Lever Micro Switch, Quick Connect Terminal, 10 A, 125 V ac, SPCO

Subtotaal (1 eenheid)*

€ 6,90

(excl. BTW)

€ 8,35

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Op voorraad

128 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 6,90

*prijsindicatie

RS-stocknr.:: 820-7482
Fabrikantnummer:: V7-1B17D8-263
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Product Type	Micro Switch
	Actuator Type	Roller Lever
	Terminal Type	Quick Connect
	Housing Material	Polycarbonate
	Contact Configuration	SPCO
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	82°C
	Contact AC Voltage	125V ac
	Microswitch Type	Miniature
	Depth	18.2mm
	Length	28.8mm
	Series	V7
	Standards/Approvals	RoHS, CSA, ENEC, UL
	Hazardous Area Certification	No

	Alles selecteren
	Merk Honeywell
	Product Type Micro Switch
	Actuator Type Roller Lever
	Terminal Type Quick Connect
	Housing Material Polycarbonate
	Contact Configuration SPCO
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 82°C
	Contact AC Voltage 125V ac
	Microswitch Type Miniature
	Depth 18.2mm
	Length 28.8mm
	Series V7
	Standards/Approvals RoHS, CSA, ENEC, UL
	Hazardous Area Certification No

Land van herkomst:: MX

Honeywell Series V7 Micro Switch, 10A Contact Current, 125V Contact AC Voltage - V7-1B17D8-263

This micro switch provides a compact, actuator-driven electrical switching solution for automation and control systems. Designed for environments requiring a small footprint and a roller lever actuator, it offers a straightforward single-pole changeover contact arrangement for switching AC loads in industrial and appliance contexts.

Features and Benefits:

• Rated for 10A current to handle moderate load switching requirements
• 125V AC contact rating for compatibility with common supply voltages
• Quick-connect terminals for efficient panel or harness installation
• Polycarbonate enclosure delivering electrical insulation and chemical resistance
• Operational range from -40 to 82 °C to suit varied ambient conditions

Applications

• Suitable for detecting mechanical end positions in conveyor systems
• Ideal for use as a limit input in industrial automation equipment
• Used with domestic and commercial appliances requiring lever actuation
• Can be used for safety interlock sensing on access panels

How is the switch mounted or connected in a control circuit?

The device uses flat quick-connect terminals allowing fast attachment to spade connectors or wiring harnesses without soldering.

What actuation style should be expected during installation?

It employs a roller lever actuator that converts linear or angular motion into a reliable switching action for mechanical interfaces.

Which approvals and standards are relevant when specifying this component?

It carries recognised approvals covering international safety and performance requirements suitable for many regulated applications.

What Terminal current capability should be considered for contact selection?

Contacts are specified to conduct currents up to 10 A, so downstream wiring and protection should match that capacity.

Standards

CSA, ENEC & UL