Microchip ATXMEGA256A3-MH, 16 bit AVR, ATxmega256A3B Microcontroller, 32 MHz, 256kB FLASH, 64-Pin QFN

Bulkkorting beschikbaar

Subtotaal 25 eenheden (geleverd op een tray)*

€ 250,75

(excl. BTW)

€ 303,50

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 21 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
25 - 99€ 10,03
100 +€ 9,70

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
133-1719P
Fabrikantnummer:
ATXMEGA256A3-MH
Fabrikant:
Microchip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Microchip

Product Type

Microcontroller

Series

ATxmega256A3B

Package Type

QFN

Mount Type

Surface

Pin Count

64

Device Core

AVR

Data Bus Width

16bit

Program Memory Size

256kB

Interface Type

PDI, SPI, TWI, USART

Maximum Clock Frequency

32MHz

RAM Size

16kB

Maximum Supply Voltage

3.6V

DACs

2 x 12 Bit

Analogue Comparators

4

Number of Programmable I/Os

50

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Length

9.1mm

Standards/Approvals

No

Width

9.1 mm

Height

0.95mm

Minimum Supply Voltage

1.6V

Instruction Set Architecture

RISC

Automotive Standard

No

Program Memory Type

FLASH

Number of Timers

1

ADCs

8 x 12 Bit

8/16-Bit AVR XMEGA Microcontrollers


Atmel AVR XMEGA microcontrollers deliver the best possible combination of real-time performance, high integration and low power consumption for 8/16-bit MCU applications.

Atmel AVR XMEGA devices employ advanced analogue-to-digital converters (ADCs) that deliver both high speed and high resolution. These ADCs offer up to four conversion channels with different result registers, which can have different setup and configuration processes. This provides easier use since different software modules can access and use an ADC independently.

The Event System facilitates inter-peripheral signaling for short and 100% predictable response time. This ensures real-time control, and also offloads the CPU because each time an event is used, one interrupt with context switch is eliminated. Most of the peripherals and the DMA controller are connected to the Event System. The AVR XMEGA E series features an asynchronous peripheral Event System instead.

The AVR XMEGA 4-channel direct memory access (DMA) controller can be used for fast, CPU-independent data transfer between any combination of data memory and peripherals.

AVR XMEGA devices use the Atmel AVR CPU. The instruction set and design of the CPU are tuned to minimize code size and maximize execution speed. Its true single-cycle execution of arithmetic and logic operations means AVR XMEGA microcontrollers perform close to 1MIPS per MHz. The fast-access register file with 32 x 8-bit general-purpose working registers is directly connected to the arithmetic logic unit (ALU). During a single clock cycle, the ALU can be fed two arbitrary registers, do a requested operation, and write back the result. It provides efficient support for 8-, 16- and 32-bit arithmetic.