STMicroelectronics, 32 bit ARM Cortex M0, STM32F070F6 Microcontroller, 48 MHz, 32kB FLASH, 20-Pin TSSOP

Memories

32 to 128 Kbytes of Flash memory

6 to 16 Kbytes of SRAM with HW parity

CRC calculation unit

Reset and power management

Digital & I/Os supply: VDD= 2.4 V to 3.6 V

Analog supply: VDDA= VDDto 3.6 V

Power-on/Power down reset (POR/PDR)

Low power modes: Sleep, Stop, Standby

Clock management

4 to 32 MHz crystal oscillator

32 kHz oscillator for RTC with calibration

Internal 8 MHz RC with x6 PLL option

Internal 40 kHz RC oscillator

Up to 51 fast I/Os

All mappable on external interrupt vectors

Up to 51 I/Os with 5V tolerant capability

5-channel DMA controller

One 12-bit, 1.0 μs ADC (up to 16 channels)

Conversion range: 0 to 3.6 V

Separate analog supply: 2.4 V to 3.6 V

Calendar RTC with alarm and periodic wakeup from Stop/Standby

11 timers

One 16-bit advanced-control timer for six-channel PWM output

Up to seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding

Independent and system watchdog timers

SysTick timer

Communication interfaces

Up to two I2C interfaces

Up to four USARTs supporting master synchronous SPI and modem control, one with auto baud rate detection

Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames

USB 2.0 full-speed interface with BCD and LPM support

Serial wire debug (SWD)