PUI Audio Microphone MEMS, 20 kHz
- RS-stocknr.:
- 287-719P
- Fabrikantnummer:
- AMM-2742-T-R
- Fabrikant:
- PUI Audio
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 63,50
(excl. BTW)
€ 77,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1.245 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 95 | € 1,27 |
| 100 - 495 | € 1,178 |
| 500 - 995 | € 1,084 |
| 1000 + | € 1,042 |
*prijsindicatie
- RS-stocknr.:
- 287-719P
- Fabrikantnummer:
- AMM-2742-T-R
- Fabrikant:
- PUI Audio
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | PUI Audio | |
| Sub Type | MEMS | |
| Product Type | Microphone | |
| Directionality/Polar Pattern | Omni Directional | |
| Maximum Operating Voltage | 3.6V | |
| Maximum Sound Pressure Level | 160dB | |
| Impedance | 300Ω | |
| Sensitivity | 42dB | |
| Length | 2.75mm | |
| Standards/Approvals | RoHS, REACH | |
| Maximum Frequency Response | 20kHz | |
| Minimum Frequency Response | 0.02kHz | |
| Minimum Operating Voltage | 1.5V | |
| Alles selecteren | ||
|---|---|---|
Merk PUI Audio | ||
Sub Type MEMS | ||
Product Type Microphone | ||
Directionality/Polar Pattern Omni Directional | ||
Maximum Operating Voltage 3.6V | ||
Maximum Sound Pressure Level 160dB | ||
Impedance 300Ω | ||
Sensitivity 42dB | ||
Length 2.75mm | ||
Standards/Approvals RoHS, REACH | ||
Maximum Frequency Response 20kHz | ||
Minimum Frequency Response 0.02kHz | ||
Minimum Operating Voltage 1.5V | ||
The PUI Audio Microphone sensitivity of the sensor at 1 kHz and 50 cm is 0 dB equals to 1V/Pa with a range of -42 ±1 db. Its rated voltage is 2 VDC, with an operating voltage range from 1.5 to 3.6 VDC. The output impedance at 1 kHz is 300 Ω, and the current consumption is 80 μA at 2 VDC and 150 μA at 3.6 VDC. The signal-to-noise ratio at 1 kHz with a 94 dB input (A-weighted) is 59 db. The decreasing voltage from 3.6 to 1.5 VDC is 0.5 db. The frequency range is 20 to 20,000 Hz, and the total harmonic distortion at 94 dB and 50 cm 1 kHz is 0.5%. The acoustic overload point at 50 cm, 1 kHz with 10% THD is 123 db.
Max Voltage on Any Pin 4 VDC
Max Sound Pressure Level 160 dB
Max Mechanical Shock 10,000 Gs