Dold Monitoring Relay, 3 Phase, 2 NO/1 NC, DIN Rail, 24 V dc, 250V ac
- RS-stocknr.:
- 427-653
- Fabrikantnummer:
- UG6946.02PS 20-400mV 0,2-6s UH=DC24V
- Fabrikant:
- Dold
Subtotaal (1 eenheid)*
€ 548,83
(excl. BTW)
€ 664,08
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 1 stuk(s) vanaf 26 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 548,83 |
*prijsindicatie
- RS-stocknr.:
- 427-653
- Fabrikantnummer:
- UG6946.02PS 20-400mV 0,2-6s UH=DC24V
- Fabrikant:
- Dold
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Dold | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 3 | |
| Contact Configuration | 2 NO/1 NC | |
| Mount Type | DIN Rail | |
| Power Consumption | 3W | |
| Time Delay | 0.2 to 6 s | |
| IP Rating | IP20, IP40 | |
| Relay Contact Current | 52A | |
| Supply AC Voltage | 250V ac | |
| Minimum Operating Temperature | -25°C | |
| Supply DC Voltage | 24 V dc | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | EN IEC 62061, EN 61508, EN 61511 and EN 61800-5-2, EN ISO 13849-1 | |
| Height | 110mm | |
| Width | 22.5mm | |
| Series | UG6946 | |
| Length | 120.3mm | |
| Alles selecteren | ||
|---|---|---|
Merk Dold | ||
Product Type Monitoring Relay | ||
Electrical Phase 3 | ||
Contact Configuration 2 NO/1 NC | ||
Mount Type DIN Rail | ||
Power Consumption 3W | ||
Time Delay 0.2 to 6 s | ||
IP Rating IP20, IP40 | ||
Relay Contact Current 52A | ||
Supply AC Voltage 250V ac | ||
Minimum Operating Temperature -25°C | ||
Supply DC Voltage 24 V dc | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals EN IEC 62061, EN 61508, EN 61511 and EN 61800-5-2, EN ISO 13849-1 | ||
Height 110mm | ||
Width 22.5mm | ||
Series UG6946 | ||
Length 120.3mm | ||
- Land van herkomst:
- DE
The Dold safe sensor less standstill monitor is suitable for detects the standstill of 3-phase and 1-phase electric motors independent of the direction of rotation. This means sensors such as encoders or proximity switches are not required. The standstill monitor measures the induced voltage of the coasting motor. If the induced voltage approaches 0, this means motor standstill for the device and the output relay is activated. With a width of only 22.5 mm, the UG 6946 can be accommodated in the control panel even under tight space conditions allowing easy retrofitting. For the implementation of different operating modes, the standstill monitor also offers the possibility of bridging the standstill monitoring muting.
Nominal voltage DC
Thermal current Ith maximum 5 A
1/2-channel 2
Measuring motor voltage maximum690 V
Gerelateerde Links
- Dold Monitoring Relay 3 Phase DIN Rail
- Dold Monitoring Relay 1 Phase DIN Rail
- Dold Monitoring Relay 1 Phase DIN Rail
- Dold Monitoring Relay 3 Phase DIN Rail
- Dold Monitoring Relay DIN Rail 220 V dc
- Dold Monitoring Relay DIN Rail, 230V ac 24 V dc
- Dold Monitoring Relay DIN Rail, 600000 ipm 24 V dc
- Dold Monitoring Relay DIN Rail 115V ac, 230 V ac