Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 0.1A to 5A, 240V ac

RS-stocknr.:: 111-3105
Fabrikantnummer:: K8DT-AW2TA
Fabrikant:: Omron

Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 0.1A to 5A, 240V ac

Subtotaal (1 eenheid)*

€ 158,47

(excl. BTW)

€ 191,75

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 29 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 158,47

*prijsindicatie

RS-stocknr.:: 111-3105
Fabrikantnummer:: K8DT-AW2TA
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPST
	Mount Type	DIN Rail
	Minimum Current Sensed	0.1A
	Maximum Current Sensed	5A
	Power Consumption	2.5VA
	Current Sensitivity	Overcurrent, Undercurrent
	Terminal Type	Push-in
	IP Rating	IP20
	Time Delay	250 ms
	Minimum Operating Temperature	-20°C
	Supply AC Voltage	240V ac
	Relay Contact Current	0.1, 5mA
	Maximum Operating Temperature	60°C
	Height	90mm
	Length	90mm
	Standards/Approvals	EN 60947-5-1, UL 60947-5-1, RoHS
	Width	17.5mm
	Series	K8DT-AW

	Alles selecteren
	Merk Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPST
	Mount Type DIN Rail
	Minimum Current Sensed 0.1A
	Maximum Current Sensed 5A
	Power Consumption 2.5VA
	Current Sensitivity Overcurrent, Undercurrent
	Terminal Type Push-in
	IP Rating IP20
	Time Delay 250 ms
	Minimum Operating Temperature -20°C
	Supply AC Voltage 240V ac
	Relay Contact Current 0.1, 5mA
	Maximum Operating Temperature 60°C
	Height 90mm
	Length 90mm
	Standards/Approvals EN 60947-5-1, UL 60947-5-1, RoHS
	Width 17.5mm
	Series K8DT-AW

English Datasheet

Land van herkomst:: CN

Omron K8DT-AW Series Monitoring Relay, 100 to 240V AC Supply Voltage, 0.1A to 5A Sensing Range - K8DT-AW2TA

This monitoring relay monitors single-phase current and signals overcurrent and undercurrent conditions within industrial control panels. It is designed for DIN-rail mounting in automation and electrical installations and operates from a wide AC supply range suited to varied mains environments.

Features and Benefits:

• Detects currents from 0.1A to 5A for precise protection and sensing
• Adjustable response to both overcurrent and undercurrent for flexible monitoring
• Single pole single throw contact provides a clear switching action
• Push-in terminals enable quick wiring and reduced installation time
• 250ms time delay prevents nuisance tripping from short transients
• Low power draw of 2.5VA minimises load on control supply

Applications

• Suitable for motor protection against stall and low-load conditions
• Ideal for monitoring current in single-phase distribution circuits
• Used with contactors to provide upstream current supervision
• Can be used for load-loss detection in heating and pump systems

What environmental temperature range can it operate within?

It functions reliably between -20°C and 60°C, allowing use in many plant and equipment rooms.

How is the device protected against ingress and where is it intended to be mounted?

The unit has an IP20 rating and is intended for installation on a DIN rail inside control enclosures.

Which standards cover its design and safety characteristics?

It is manufactured to meet EN 60947-5-1 and UL 60947-5-1 requirements and conforms to RoHS restrictions.

What are the Terminal and switching current specifics?

Connections use push-in terminals and the relay contact switching capability includes small sensing currents from 0.1mA up to 5mA.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals