Broyce Control Monitoring Relay, 2SPNO, DIN Rail, 100V ac, 230 V ac 100 → 230 V dc

RS-stocknr.:: 188-3545
Fabrikantnummer:: LR44/2 100-230V AC/DC
Fabrikant:: Broyce Control

Broyce Control Monitoring Relay, 2SPNO, DIN Rail, 100V ac, 230 V ac 100 → 230 V dc

Subtotaal (1 eenheid)*

€ 61,37

(excl. BTW)

€ 74,26

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 61,37

*prijsindicatie

RS-stocknr.:: 188-3545
Fabrikantnummer:: LR44/2 100-230V AC/DC
Fabrikant:: Broyce Control

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Broyce Control
	Product Type	Monitoring Relay
	Application	Voltage
	Contact Configuration	2SPNO
	Mount Type	DIN Rail
	Power Consumption	3VA
	Terminal Type	Screw
	IP Rating	IP20
	Time Delay	1 s
	Supply DC Voltage	100 → 230 V dc
	Contact Current	5A
	Supply AC Voltage	100V ac, 230V ac
	Minimum Operating Temperature	+60°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	IEC, RoHS, CE
	Height	85mm
	Width	44mm
	Length	63.5mm
	Series	44

	Alles selecteren
	Merk Broyce Control
	Product Type Monitoring Relay
	Application Voltage
	Contact Configuration 2SPNO
	Mount Type DIN Rail
	Power Consumption 3VA
	Terminal Type Screw
	IP Rating IP20
	Time Delay 1 s
	Supply DC Voltage 100 → 230 V dc
	Contact Current 5A
	Supply AC Voltage 100V ac, 230V ac
	Minimum Operating Temperature +60°C
	Maximum Operating Temperature 60°C
	Standards/Approvals IEC, RoHS, CE
	Height 85mm
	Width 44mm
	Length 63.5mm
	Series 44

Datasheet LR44/2 100-230V AC/DC

Land van herkomst:: GB

The product is designed to monitor the status of the externally wired contacts and operate/alternate the output relays in turn on each closure of the contact. A “help” function is included such that it allows the second relay to energize (after a short delay) when the other contact is closed. An auxiliary supply (required to power the unit) must be present for the product to function.

Logic Relay designed to balance wear between motors, compressors and generators

Monitors 2 external N.O. contacts

Built in “Help” function

Isolated Auxiliary supply

2 x SPNO Relay outputs

44mm wide, DIN Rail mount

Broyce Control Monitoring Relay, 2SPNO, DIN Rail, 100V ac, 230 V ac 100 → 230 V dc

Gerelateerde Links