Omron Monitoring Relay, 1 Phase, Transistor, DIN Rail, 10A to 200A, 20.4→26.4 V

RS-stocknr.:: 214-7947
Fabrikantnummer:: K8DT-AW3TD
Fabrikant:: Omron

Omron Monitoring Relay, 1 Phase, Transistor, DIN Rail, 10A to 200A, 20.4→26.4 V

Subtotaal (1 eenheid)*

€ 158,47

(excl. BTW)

€ 191,75

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 26 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 158,47

*prijsindicatie

RS-stocknr.:: 214-7947
Fabrikantnummer:: K8DT-AW3TD
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	Transistor
	Mount Type	DIN Rail
	Minimum Current Sensed	10A
	Maximum Current Sensed	200A
	Switching Voltage	24V
	Power Consumption	1.8VA
	Current Sensitivity	Overcurrent, Undercurrent
	Terminal Type	Push-in
	Time Delay	0.1 to 30 s
	IP Rating	IP20
	Supply AC Voltage	24V ac
	Minimum Operating Temperature	-20°C
	Supply DC Voltage	20.4→26.4 V
	Maximum Operating Temperature	60°C
	Width	17.5mm
	Length	90mm
	Standards/Approvals	RoHS
	Series	K8DT-AW
	Height	100mm

	Alles selecteren
	Merk Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration Transistor
	Mount Type DIN Rail
	Minimum Current Sensed 10A
	Maximum Current Sensed 200A
	Switching Voltage 24V
	Power Consumption 1.8VA
	Current Sensitivity Overcurrent, Undercurrent
	Terminal Type Push-in
	Time Delay 0.1 to 30 s
	IP Rating IP20
	Supply AC Voltage 24V ac
	Minimum Operating Temperature -20°C
	Supply DC Voltage 20.4→26.4 V
	Maximum Operating Temperature 60°C
	Width 17.5mm
	Length 90mm
	Standards/Approvals RoHS
	Series K8DT-AW
	Height 100mm

Omron K8DT-AW Series Monitoring Relay, 200A Maximum Current Sensed, 10A Minimum Current Sensed - K8DT-AW3TD

This monitoring relay provides single-phase current supervision for protection of electrical systems in industrial control panels. It senses deviations from set current thresholds and issues a transistor switching signal at 24V to indicate overcurrent or undercurrent conditions. Designed for DIN-rail mounting, it operates within typical industrial temperature ranges and connects via push-in terminals for Rapid installation.

Features and Benefits:

• Detects currents from 10 A to 200 A, offering a broad sensing range
• Adjustable time delay 0.1-30 s, reducing nuisance trips during transients
• Accepts 20.4-26.4V supply for flexible DC/AC control systems
• Transistor output enables fast solid-state signalling at 24 V
• Low power draw of 1.8 VA, minimising load on the control supply

Applications

• Suitable for monitoring motor running currents to indicate stall or overload
• Ideal for detecting supply loss on single-phase feeders in panels
• Used with industrial controllers to alarm on undervoltage-driven low current
• Can be used for preventive maintenance by logging persistent overcurrent events

What environmental protection does it provide for panel use?

The enclosure has an IP20 rating, offering protection against solid objects while requiring installation inside an enclosed cabinet.

How is it mounted and connected in existing switchgear?

It clips onto a standard DIN rail and uses push-in terminals to simplify wiring without screws.

What thermal limits should be observed during operation?

It is specified to operate between -20 °C and 60 °C, so ambient and adjacent component heating must be considered.

Which output configuration is available for interfacing with PLCs?

A transistor contact configuration is provided, suitable for direct interfacing with 24V control inputs.

Are there any material or regulatory considerations for procurement?

The unit complies with RoHS directives, indicating restriction of certain hazardous substances.