Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 2mA to 500mA, 240V ac

RS-stocknr.:: 819-3223
Fabrikantnummer:: K8AK-AW1 100-240VAC
Fabrikant:: Omron

Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 2mA to 500mA, 240V ac

Subtotaal (1 eenheid)*

€ 153,72

(excl. BTW)

€ 186,00

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 7 stuk(s) vanaf 10 augustus 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 153,72

*prijsindicatie

RS-stocknr.:: 819-3223
Fabrikantnummer:: K8AK-AW1 100-240VAC
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Minimum Current Sensed	2mA
	Power Consumption	4.6VA
	Maximum Current Sensed	500mA
	Current Sensitivity	Undercurrent, Overcurrent
	Terminal Type	Screw
	IP Rating	IP20
	Supply AC Voltage	240V ac
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	60°C
	Length	100mm
	Standards/Approvals	CCC, CSA, CE
	Height	90mm
	Series	K8AK-AW
	Width	22.5mm

	Alles selecteren
	Merk Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPDT
	Mount Type DIN Rail
	Minimum Current Sensed 2mA
	Power Consumption 4.6VA
	Maximum Current Sensed 500mA
	Current Sensitivity Undercurrent, Overcurrent
	Terminal Type Screw
	IP Rating IP20
	Supply AC Voltage 240V ac
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 60°C
	Length 100mm
	Standards/Approvals CCC, CSA, CE
	Height 90mm
	Series K8AK-AW
	Width 22.5mm

Datasheet

Omron K8AK-AW Series Monitoring Relay, 240V AC Supply Voltage, 22.5mm Width - K8AK-AW1 100-240VAC

This monitoring relay monitors single-phase current to detect undercurrent and overcurrent conditions within industrial control systems. Designed for DIN-rail mounting in control panels, it operates across a wide supply range and is suited to general automation and electrical protection tasks without detailing every specification.

Features and Benefits:

• Detects currents from 2 mA for sensitive load monitoring
• Senses up to 500 mA for small-circuit protection
• Single-phase operation for simple integration into systems
• Consumes 4.6 VA to limit supply loading on control bus
• SPDT screw terminals for straightforward wiring connections
• IP20 enclosure rating for protected indoor panel environments

Applications

• Suitable for monitoring pump motor control circuits
• Ideal for detecting conductor faults in relay panels
• Used with small heaters and resistive loads for current supervision
• Can be used for preventive maintenance alerts in assembly lines
• Suitable for integration into OEM control cabinets for machine protection

What supply voltages will it accept for operation?

It accepts AC supply voltages across a broad 100-240 VAC range, allowing compatibility with varying site supplies.

How is the unit mounted within an electrical cabinet?

The device clips onto a standard DIN rail for Compact panel installation and straightforward replacement.

Which standards approvals does it carry for regulatory acceptance?

It has been assessed and carries CCC, CSA and CE approvals for use in applicable regions.

What Terminal and contact arrangements are provided for connections?

Wiring is via screw-type terminals and switching is through a single-pole double-throw contact configuration.

What ambient temperatures can it withstand during operation?

It is rated for continuous operation between -20 °C and 60 °C for a wide range of site conditions.

Standards

EN 60947-5-1 pollution level 2 installation category III, UL 508.
Terminal protection IP20.