ABB Monitoring Relay, 1 Phase, DPDT, DIN Rail, 24 V dc 110/130 V ac, 220/240 V ac
- RS-stocknr.:
- 876-5020
- Artikelnummer Distrelec:
- 304-10-102
- Fabrikantnummer:
- 1SVR740700R2200 CM-MSS.23P
- Fabrikant:
- ABB
Subtotaal (1 eenheid)*
€ 97,87
(excl. BTW)
€ 118,42
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 97,87 |
*prijsindicatie
- RS-stocknr.:
- 876-5020
- Artikelnummer Distrelec:
- 304-10-102
- Fabrikantnummer:
- 1SVR740700R2200 CM-MSS.23P
- Fabrikant:
- ABB
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ABB | |
| Product Type | Monitoring Relay | |
| Sub Type | PTC | |
| Electrical Phase | 1 | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Terminal Type | Push-in | |
| IP Rating | IP50, IP20 | |
| Contact Current | 3.7mA | |
| Minimum Operating Temperature | -25°C | |
| Supply DC Voltage | 24 V dc | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| Series | CM-MSS | |
| Length | 103.7mm | |
| Height | 85.6mm | |
| Alles selecteren | ||
|---|---|---|
Merk ABB | ||
Product Type Monitoring Relay | ||
Sub Type PTC | ||
Electrical Phase 1 | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Terminal Type Push-in | ||
IP Rating IP50, IP20 | ||
Contact Current 3.7mA | ||
Minimum Operating Temperature -25°C | ||
Supply DC Voltage 24 V dc | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
Series CM-MSS | ||
Length 103.7mm | ||
Height 85.6mm | ||
CM-MSS Series Thermistor Motor Protection Relays
Heavy duty starting
Increased switching frequency
High ambient temperature
Insufficient cooling
Break operation
Unbalance
The CM range of thermistor motor protection relays are used to control motors equipped with PTC temperature sensors. The PTC temperature sensors are incorporated in the motor windings to measure the motor heating. This enables direct control and evaluation of the following operating conditions:
Main features include:
Dynamic interrupted wire detection
Wide control supply voltage range for this series 24-240 V AC/DC
Short circuit monitoring of the sensor circuit
Non-volatile fault storage
Remote reset
Screw connection technology or Easy Connect Technology available
Single Sensor Input Version
Wire Break Detection
Approvals
Some products also have the ATEX approval for the use in hazardous areas.
Gerelateerde Links
- ABB Monitoring Relay DPDT 24 V dc 110/130 V ac, 220/240 V ac
- ABB Monitoring Relay DPDT 24 V dc 220/240 V ac, 110/130 V ac
- ABB Monitoring Relay DIN Rail, 24 V dc 24 V ac
- ABB Monitoring Relay SPDT 24 V dc 220/240 V ac, 110/130 V ac
- ABB Monitoring Relay DIN Rail, 24 V dc 24/240 V ac
- ABB Monitoring Relay DIN Rail, 24 V dc 24 V ac
- ABB Monitoring Relay 160/300 V ac Monitor Range DIN Rail
- ABB Monitoring Relay DIN Rail, 24 V dc 24/240 V ac