ON Semiconductor NCP51705MNTXG Full/Half Bridge Half Bridge MOSFET Power Driver, 6 (Sink) A, 6 (Source) A 24-Pin, QFN

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: KR
Productomschrijving

The NCP51705 driver is designed to primarily drive SiC MOSFET transistors. To achieve the lowest possible conduction losses, the driver is capable to deliver the maximum allowable gate voltage to the SiC MOSFET device. By providing high peak current during turn−on and turn−off, switching losses are also minimized. For improved reliability, dV/dt immunity and even faster turn−off, the NCP51705 can utilize its on−board charge pump to generate a user selectable negative voltage rail.

Allow independent Turn-ON/Turn-OFF Adjustment
Efficient SiC MOSFET Operation during the Conduction Period
Fast Turn-off and Robust dV/dt Immunity
Minimize complexity of bias supply in isolated gate drive applications
Sufficient VGS amplitude to match SiC best performance
Self protection of the design

Specificaties
Kenmerk Waarde
Number of Drivers 1
Minimum Operating Supply Voltage 10 V
Maximum Operating Supply Voltage 22 V
Topology Half Bridge
Mounting Type Surface Mount
Peak Output Current 6 (Sink) A, 6 (Source) A
Number of Outputs 1
Polarity Inverting, Non-Inverting
Package Type QFN
Pin Count 24
Bridge Type Full Bridge, Half Bridge
Input Logic Compatibility PWM
High and Low Sides Dependency Independent
Fall Time 15ns
Dimensions 4 x 4 x 0.95mm
Length 4mm
Maximum Operating Temperature +125 °C
Rise Time 15ns
Height 0.95mm
Time Delay 50ns
Minimum Operating Temperature -40 °C
Width 4mm
Input Bias Current 50µA
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 25-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 3000)
1,402
(excl. BTW)
1,696
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 +
€ 1,402
€ 4.206,00
*prijsindicatie
Related Products
A range of full-bridge drivers designed to control ...
Description:
A range of full-bridge drivers designed to control MOSFET and IGBT power devices in 3-phase applications. The devices feature a maximum blocking voltage of 600 V and low-side control using CMOS and TTL compatible signal levels.
Capable of driving the gates of N-channel MOSFETs ...
Description:
Capable of driving the gates of N-channel MOSFETs and IGBTs in a half-bridge configuration. The half-bridge circuit consists of upper and lower MOSFETs connected in a cascode arrangement. The two MOSFET switches are turned on and off complementary to each ...
The MIC4605 is an 85V half-bridge MOSFET driver ...
Description:
The MIC4605 is an 85V half-bridge MOSFET driver that features adaptive-dead-time and shoot-through protection. The adaptive-dead-time circuitry actively monitors the half-bridge outputs to minimize the time between high-side and low-side MOSFET transitions, thus maximizing power efficiency. 5.5V to 16V gate ...
The MIC4103 and MIC4104 are high frequency, 100V ...
Description:
The MIC4103 and MIC4104 are high frequency, 100V Half Bridge MOSFET drivers with faster turn-off characteristics than the MIC4100 and MIC4101 drivers. They feature fast 24ns propagation delay times and 6ns driver fall times. Asymmetrical, low impedance outputs drive 1000pF ...