ON Semiconductor NCP51530BDR2G Dual Full/Half Bridge MOSFET Power Driver, 3 (Sink) A, 3.5 (Source) A 8-Pin, SOIC

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PH
Productomschrijving

NCP51530 is a 700 V high side and low side driver with high drive capabilities for AC-DC power supplies and inverters. NCP51530 offers best in class propagation delays, low quiescent current and low switching current at high frequencies of operation. This device thus enables a highly efficient design for power supplies operating at high frequencies.

Design margin for AC/DC design
Suitable for high frequency operation
Increased efficiency & Allow paralleling
Very robust design
Small PCB footprint, improved creepage distance and parasitic
Suitable for heavy loads

Specificaties
Kenmerk Waarde
Number of Drivers 2
Minimum Operating Supply Voltage 10 V
Maximum Operating Supply Voltage 17 V
Mounting Type Surface Mount
Peak Output Current 3 (Sink) A, 3.5 (Source) A
Number of Outputs 2
Package Type SOIC
Pin Count 8
Bridge Type Full Bridge, Half Bridge
Input Logic Compatibility 3.3V, 5V
High and Low Sides Dependency Independent
Height 1.5mm
Rise Time 15ns
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Length 5mm
Fall Time 15ns
Automotive Standard AEC-Q100
Time Delay 40ns
Width 4mm
Dimensions 5 x 4 x 1.5mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04-06-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 2500)
0,956
(excl. BTW)
1,157
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
2500 - 5000
€ 0,956
€ 2.390,00
7500 +
€ 0,896
€ 2.240,00
*prijsindicatie
Related Products
The Semikron SKYPER® 12 press-fit modules are IGBT ...
Description:
The Semikron SKYPER® 12 press-fit modules are IGBT drivers for SEMIX Press-fit and Econodual Press-fit IGBT modules. The half-bridge driver boards can be mounted directly onto 17mm press-fit modules. With 30% fewer components than other plug-and-play solutions, these drivers achieve ...
Power drivers for MOSFET and IGBT in low ...
Description:
Power drivers for MOSFET and IGBT in low side, high side, and half-bridge circuits.
Capable of driving the gates of N-channel MOSFETs ...
Description:
Capable of driving the gates of N-channel MOSFETs and IGBTs in a half-bridge configuration. The half-bridge circuit consists of upper and lower MOSFETs connected in a cascode arrangement. The two MOSFET switches are turned on and off complementary to each ...
The MIC4605 is an 85V half-bridge MOSFET driver ...
Description:
The MIC4605 is an 85V half-bridge MOSFET driver that features adaptive-dead-time and shoot-through protection. The adaptive-dead-time circuitry actively monitors the half-bridge outputs to minimize the time between high-side and low-side MOSFET transitions, thus maximizing power efficiency. 5.5V to 16V gate ...