Infineon HEXFET N-Channel MOSFET, 3.6 A, 40 V Enhancement, 3-Pin SOT-23 IRLML0040TRPBF

RS-stocknr.:: 725-9347
Artikelnummer Distrelec:: 304-45-310
Fabrikantnummer:: IRLML0040TRPBF
Fabrikant:: Infineon

Infineon HEXFET N-Channel MOSFET, 3.6 A, 40 V Enhancement, 3-Pin SOT-23 IRLML0040TRPBF

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 verpakking van 20 eenheden)*

€ 6,36

(excl. BTW)

€ 7,70

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

380 stuk(s) klaar voor verzending
320 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 5.400 stuk(s) vanaf 14 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
20 - 140	€ 0,318	€ 6,36
160 - 740	€ 0,193	€ 3,86
760 - 1480	€ 0,168	€ 3,36
1500 +	€ 0,155	€ 3,10

*prijsindicatie

RS-stocknr.:: 725-9347
Artikelnummer Distrelec:: 304-45-310
Fabrikantnummer:: IRLML0040TRPBF
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Channel Type	N
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	3.6A
	Maximum Drain Source Voltage Vds	40V
	Series	HEXFET
	Package Type	SOT-23
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	56mΩ
	Channel Mode	Enhancement
	Maximum Power Dissipation Pd	1.3W
	Typical Gate Charge Qg @ Vgs	2.6nC
	Maximum Gate Source Voltage Vgs	-16V, +16V
	Forward Voltage Vf	1.2V
	Minimum Operating Temperature	-55°C
	Maximum Operating Temperature	150°C
	Standards/Approvals	No
	Height	1.02mm
	Length	3.04mm
	Width	1.4mm
	Automotive Standard	No

	Alles selecteren
	Merk Infineon
	Channel Type N
	Product Type MOSFET
	Maximum Continuous Drain Current Id 3.6A
	Maximum Drain Source Voltage Vds 40V
	Series HEXFET
	Package Type SOT-23
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 56mΩ
	Channel Mode Enhancement
	Maximum Power Dissipation Pd 1.3W
	Typical Gate Charge Qg @ Vgs 2.6nC
	Maximum Gate Source Voltage Vgs -16V, +16V
	Forward Voltage Vf 1.2V
	Minimum Operating Temperature -55°C
	Maximum Operating Temperature 150°C
	Standards/Approvals No
	Height 1.02mm
	Length 3.04mm
	Width 1.4mm
	Automotive Standard No

Infineon HEXFET Series MOSFET, 40V Maximum Drain Source Voltage, 3.6A Maximum Continuous Drain Current - IRLML0040TRPBF

This n-channel enhancement-mode MOSFET is designed for compact surface-mount power switching in electronic circuits. It operates across an extended temperature span and is suitable for applications requiring moderate current handling and low conduction losses. The device is supplied in a three-pin SOT-23 package and targets space-constrained SMT layouts where fast switching and efficient power transfer are required.

Features and Benefits:

• Low on-resistance of 56mΩ reduces conduction losses
• 40V drain-source rating supports medium-voltage switching
• Continuous drain current 3.6A enables modest load driving
• Typical gate charge 2.6nC permits faster switching speeds
• Power dissipation 1.3W manages thermal load in compact layouts
• Gate-source withstand 16V offers robust drive margin

Applications

• Suitable for DC-DC converter switch stages
• Ideal for battery-powered motor drivers
• Used with load switches in portable electronics
• Can be used for synchronous rectification in power supplies
• Appropriate for general-purpose switching in control boards

What thermal range can it tolerate in demanding environments?

It is rated to operate from -55°C up to 150°C, allowing use in both cold and high-temperature conditions.

How does the package affect mounting and board space?

The SOT-23 surface-mount package offers a small footprint and straightforward three-pin PCB soldering for dense assemblies.

What aspect of the device helps reduce switching energy losses?

The relatively low typical gate charge of 2.6nC lowers the energy required to drive the gate, benefiting high-frequency switching designs.

What electrical limits should designers respect for safe operation?

Designers must not exceed the 40V drain-source voltage, the 16V gate-source limit, or the specified 3.6A continuous drain current.