Allen Bradley 842E Series Absolute Absolute Encoder 30V, 262144 ppr ppr, Analogue, Binary Signal, Hollow Type, 13 mm

RS-stocknr.:: 136-7773
Fabrikantnummer:: 842E-MIP10BA
Fabrikant:: Allen Bradley

Allen Bradley 842E Series Absolute Absolute Encoder 30V, 262144 ppr ppr, Analogue, Binary Signal, Hollow Type, 13 mm

Niet beschikbaar

RS heeft dit product niet meer op voorraad.

RS-stocknr.:: 136-7773
Fabrikantnummer:: 842E-MIP10BA
Fabrikant:: Allen Bradley

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Allen Bradley
	Encoder Technology	Absolute
	Product Type	Absolute Encoder
	Pulses Per Revolution	262144ppr
	Series	842E
	Maximum Revolutions	6000rpm
	Output Signal Type	Analogue, Binary
	Shaft Type	Hollow
	Shaft Diameter	13mm
	Interface Type	Ethernet
	IP Rating	IP65, IP67
	Terminal Type	M12 Connector
	Maximum Supply Voltage	30V
	Minimum Operating Temperature	-30°C
	Overall Depth	71.5mm
	Overall Height	60mm
	Standards/Approvals	CE
	Overall Width	63mm
	Mount Type	Hollow Shaft Flange
	Maximum Operating Temperature	85°C

	Alles selecteren
	Merk Allen Bradley
	Encoder Technology Absolute
	Product Type Absolute Encoder
	Pulses Per Revolution 262144ppr
	Series 842E
	Maximum Revolutions 6000rpm
	Output Signal Type Analogue, Binary
	Shaft Type Hollow
	Shaft Diameter 13mm
	Interface Type Ethernet
	IP Rating IP65, IP67
	Terminal Type M12 Connector
	Maximum Supply Voltage 30V
	Minimum Operating Temperature -30°C
	Overall Depth 71.5mm
	Overall Height 60mm
	Standards/Approvals CE
	Overall Width 63mm
	Mount Type Hollow Shaft Flange
	Maximum Operating Temperature 85°C

Land van herkomst:: DE

Allen Bradley Absolute Encoder, 10 to 30V DC Supply Voltage, Ethernet Interface - 842E-MIP10BA

Looking for an accurate way to monitor the movement of industrial equipment? Choose this single-turn absolute encoder from Rockwell Automation's Allen Bradley range. When fitted on a moving part, it uses a built-in rotating disc to measure the motion with an ultra-high accuracy of 18 bits. As its shaft is hollow, you can adjust the device to match the motor you're using, which makes it a versatile option. The IP67 rating for its aluminium housing indicates that it's dust-tight and waterproof up to a depth of one metre.

Features & Benefits

• Maximum operating current of 200mA saves energy

• 10/100Mbps transmission speed for use at higher or lower transfer rates

• Aluminium housing is resistant to corrosion so the unit can be used in damp environments

• Operating temperature range between -30°C and +85°C indicates it functions safely in challenging conditions

Standards and Certifications

• EN 61000-6-2

• EN 61000-6-3

• CE Marked for all applicable directives

• IEC 60529

Can I connect this device to a local area network?

Yes, you can. The encoder has a built-in Ethernet switch, meaning you can use it to transmit data on a network.

842E EtherNet/IP Absolute Encoders

Allen Bradley 842E series ultra-high resolution EtherNet/IP absolute encoders provide dual-port Ethernet and M12 connectors. The 842E series encoders are designed for high performance and reliability in harsh industrial environments. Encoders include an embedded EtherNet/IP switch to connect additional Ethernet/IP capable products in series and/or support a Device Level Ring (DLR) for Ethernet media redundancy.;Available in single-turn 18-bit resolution and multi-turn 30-bit resolution, these high-resolution absolute encoders are ideal for automotive, material handling and general factory automation applications.

Features and Benefits

EtherNet/IP interface;Simple and fast set up;Single-turn 18-bit resolution or multi-turn 30-bit resolution;Embedded switch;Device Level Ring (DLR);Revolution divisor;Solid and blind hollow shaft options;M12 Connectors;Status indication LEDs;Hardware/software IP address setting;IP67 Rated