SICK DFV60 Series Incremental Measuring Wheel 32V, 65536 ppr ppr, HTL, TTL Signal, Stainless Steel Type

RS-stocknr.:: 223-0976
Fabrikantnummer:: DFV60A-22PC65536 / 1051309
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 352,49

(excl. BTW)

€ 426,51

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 01 februari 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 352,49

*prijsindicatie

RS-stocknr.:: 223-0976
Fabrikantnummer:: DFV60A-22PC65536 / 1051309
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Measuring Wheel
	Encoder Technology	Incremental
	Pulses Per Revolution	65536ppr
	Series	DFV60
	Output Signal Type	HTL, TTL
	Shaft Type	Stainless Steel
	Interface Type	Incremental
	IP Rating	IP65
	Maximum Supply Voltage	32V
	Minimum Operating Temperature	-20°C
	Overall Width	86mm
	Overall Height	288mm
	Standards/Approvals	EN 61000-6-2, EN 61000-6-4
	Mount Type	Flange
	Maximum Operating Temperature	100°C
	Switching Frequency	820kHz

	Alles selecteren
	Merk SICK
	Product Type Measuring Wheel
	Encoder Technology Incremental
	Pulses Per Revolution 65536ppr
	Series DFV60
	Output Signal Type HTL, TTL
	Shaft Type Stainless Steel
	Interface Type Incremental
	IP Rating IP65
	Maximum Supply Voltage 32V
	Minimum Operating Temperature -20°C
	Overall Width 86mm
	Overall Height 288mm
	Standards/Approvals EN 61000-6-2, EN 61000-6-4
	Mount Type Flange
	Maximum Operating Temperature 100°C
	Switching Frequency 820kHz

Land van herkomst:: DE

Overview

The DFV60 high-resolution measuring wheel encoder is an extremely robust solution for determining position and speed directly on the conveyor belt, even in applications where the measuring surface is subject to high levels of vibrations. The DFV60 consists of an incremental encoder with a mounting arm and two measuring wheels. The spring arm is available as an accessory. Extensive programmability of output signal, zero pulse and lines counts from 1 to 65,536 enable customer-specific adaptations.

At a glance

Rotatable spring arm for universal use

300 mm wheel circumference with O-ring made from NBR70

Mounting arm and measurement wheels made from aluminium

Programmable output voltage, zero pulse position, zero pulse width and number of pulses

Connection: radial M12 male connector connection or radial/axial cable connection

Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull

Remote zero setting possible

Your Benefits

Universal-use spring arm ensures fast and simple mounting

The high level of spring tension enables use in harsh environmental conditions

Reduced storage costs and downtime due to programmability

Connector-in cable connection in radial or axial direction enables customer-specific cable solutions

Excellent concentricity even at high speeds

Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime

Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs

Programmable zero pulse position simplifies installation

Applications

Speed measuring

Non-contact speed and length measurement

Length measurement of fabric sheets with measuring wheel encoder

Speed measurement on the conveying equipment

Positioning and speed measurement on the shuttle

Speed measurement on the conveyor belt

Retrofittable speed measurement on narrow aisle forklifts

Monitoring of the volume flow on the conveyor belt

Note

Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.