SICK VFS60A Series Incremental Mechanical Rotary Encoder 32V, 1024 ppr ppr, TTL Signal, Hollow Type, 15 mm Shaft

RS-stocknr.:: 223-1017
Fabrikantnummer:: VFS60A-BHPK01024 / 1036747
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 718,11

(excl. BTW)

€ 868,91

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

2 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 1 stuk(s) vanaf 13 november 2026
Plus verzending 1 stuk(s) vanaf 20 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 718,11

*prijsindicatie

RS-stocknr.:: 223-1017
Fabrikantnummer:: VFS60A-BHPK01024 / 1036747
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Mechanical Rotary Encoder
	Encoder Technology	Incremental
	Series	VFS60A
	Pulses Per Revolution	1024ppr
	Maximum Revolutions	6000rpm
	Output Signal Type	TTL
	Shaft Type	Hollow
	Shaft Diameter	15mm
	Interface Type	Incremental
	IP Rating	IP67, IP65
	Maximum Supply Voltage	32V
	Minimum Operating Temperature	30°C
	Overall Depth	60mm
	Overall Height	45.5mm
	Standards/Approvals	EN 61000-6-2, EN 61000-6-4, IEC 60529
	Overall Width	72mm
	Maximum Operating Temperature	100°C
	Mount Type	Flange
	Switching Frequency	820kHz

	Alles selecteren
	Merk SICK
	Product Type Mechanical Rotary Encoder
	Encoder Technology Incremental
	Series VFS60A
	Pulses Per Revolution 1024ppr
	Maximum Revolutions 6000rpm
	Output Signal Type TTL
	Shaft Type Hollow
	Shaft Diameter 15mm
	Interface Type Incremental
	IP Rating IP67, IP65
	Maximum Supply Voltage 32V
	Minimum Operating Temperature 30°C
	Overall Depth 60mm
	Overall Height 45.5mm
	Standards/Approvals EN 61000-6-2, EN 61000-6-4, IEC 60529
	Overall Width 72mm
	Maximum Operating Temperature 100°C
	Mount Type Flange
	Switching Frequency 820kHz

Land van herkomst:: DE

Overview

Motor feedback systems from the VFS60 product family are ideally suited for use in industrial applications under rough conditions, especially for attaching to asynchronous motors. A large number of product variants meets almost all requirements: with through hollow shaft or blind hollow shaft of 8 mm to 15 mm diameter, with plug-in cable connection or pre-assembled male connector at the cable end. This means more mechanical flexibility. In addition, the robust shaft bearing increases the service life while at the same time reducing the servicing and maintenance requirements. The increased bearing distance guarantees a previously unattainable low level of vibration and optimum concentricity, even at maximum operating speed. The product families are allocated to different performance classes. From different defined line counts to a pre-programmed version. Moreover, all the common electrical interfaces are available. TTL, HTL or sine 0.5Vss.

At a glance

TTL, HTL or sine 0.5 Vpp interfaces

Resolution of up to 65,536 lines per revolution

Individual programming of the interface, line count and of the zero pulse

Direct programming via RS485

Excellent concentricity through large distance between the ball bearings

Extremely rugged

Protection class IP65

Mechanical flexibility through blind hollow shaft and through hollow shafts with diameters of 8 to 15 mm, available with various torque supports

Temperature range from –30 °C to +100 °C

Insulated shaft connection through plastic collar possible

Your Benefits

Programmable version for a reduced product variety

Various programming tools designed to take into account your own programming requirements

High performance and reliability even in rough ambient conditions

High vibration resistance and extended temperature range through nickel code disk

Large ball bearing distances reduce uneven wear and minimize vibration on the motor feedback housing, which increases the motor feedback system’s service life

The “insulated shaft connection” prevents electrical continuity through the bearings of the motor feedback system, thus extending the operating life of the system

Note

Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.