SICK AFS/AFM60 Series Absolute Absolute Encoder 30V dc, Profinet Signal, Blind Hollow Type, 8 mm Shaft

RS-stocknr.:: 266-7136
Fabrikantnummer:: AFM60A-BBNB018X12 / 1059038
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 900,92

(excl. BTW)

€ 1.090,11

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

1 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 900,92

*prijsindicatie

RS-stocknr.:: 266-7136
Fabrikantnummer:: AFM60A-BBNB018X12 / 1059038
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Encoder Technology	Absolute
	Product Type	Absolute Encoder
	Series	AFS/AFM60
	Maximum Revolutions	6000rpm
	Output Signal Type	Profinet
	Shaft Type	Blind Hollow
	Shaft Diameter	8mm
	Interface Type	PROFINET
	IP Rating	IP65, IP67
	Maximum Supply Voltage	30V dc
	Minimum Operating Temperature	-40°C
	Overall Depth	68.6mm
	Overall Height	72mm
	Standards/Approvals	CE
	Overall Width	68.6mm
	Maximum Operating Temperature	85°C
	Mount Type	Flange

	Alles selecteren
	Merk SICK
	Encoder Technology Absolute
	Product Type Absolute Encoder
	Series AFS/AFM60
	Maximum Revolutions 6000rpm
	Output Signal Type Profinet
	Shaft Type Blind Hollow
	Shaft Diameter 8mm
	Interface Type PROFINET
	IP Rating IP65, IP67
	Maximum Supply Voltage 30V dc
	Minimum Operating Temperature -40°C
	Overall Depth 68.6mm
	Overall Height 72mm
	Standards/Approvals CE
	Overall Width 68.6mm
	Maximum Operating Temperature 85°C
	Mount Type Flange

Land van herkomst:: DE

SICK AFS/AFM60 Series Absolute Encoder, 8mm Shaft Diameter, IP65/IP67 - AFM60A-BBNB018X12 / 1059038

This absolute encoder provides precise angular position feedback for automation and motion-control systems using a fieldbus interface. It is designed for industrial environments where rugged ingress protection and a Compact flange mounting are required, delivering position data via an Ethernet-based control network and supporting continuous operation across a wide temperature range.

Features and Benefits:

• Profinet Interface enables real-time networked position feedback
• Absolute measurement preserves position after power loss
• Blind hollow 8mm shaft allows secure coupling with minimal alignment
• Rated for up to 6000 r/min to suit high-speed rotary applications
• Wide supply tolerance supporting operation up to 30V
• IP65 and IP67 ingress protection for dust and temporary immersion

Applications

• Suitable for servo and actuator position feedback in factories
• Ideal for conveyor speed and position monitoring systems
• Used with rotary indexing tables in assembly equipment
• Can be used for motor feedback in variable-speed drives
• Suitable for robotics joint-angle measurement in automation cells

What mounting arrangement does it use and why is that useful?

It uses a flange-mount design that simplifies axial alignment and secure installation on housings and gearboxes without additional adaptor plates.

How does the hollow shaft design affect installation?

The blind hollow shaft accepts a mating shaft up to 8mm and permits clamping or keyed couplings, reducing transmitted axial loads and easing replacement.

What environmental resilience can be expected during washdowns or accidental immersion?

The enclosure meets IP65 and IP67 criteria, providing protection against dust ingress and temporary immersion in water under defined conditions.

Which operating temperatures does it accommodate for outdoor or cold-room use?

It is rated to function across a wide thermal span from −40 °C up to 85 °C, covering typical industrial cold and heated environments.

How does the encoder maintain position data when power is removed?

It delivers absolute positional output so the current shaft position is available immediately after power is restored via the Profinet interface.