SICK DGS80 Series Incremental Incremental Encoder 30V, 4096 ppr ppr, HTL/Push Pull Signal, Through Hollow Type, 42 mm

RS-stocknr.:: 266-7725
Fabrikantnummer:: DGS80B-TYLK04096 / 1118753
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 606,00

(excl. BTW)

€ 733,26

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 17 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 606,00

*prijsindicatie

RS-stocknr.:: 266-7725
Fabrikantnummer:: DGS80B-TYLK04096 / 1118753
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Encoder Technology	Incremental
	Product Type	Incremental Encoder
	Series	DGS80
	Pulses Per Revolution	4096ppr
	Maximum Revolutions	3600rpm
	Output Signal Type	HTL/Push Pull
	Shaft Type	Through Hollow
	Shaft Diameter	42mm
	Interface Type	Push Pull
	IP Rating	IP65
	Terminal Type	Cable
	Maximum Supply Voltage	30V
	Minimum Operating Temperature	-25°C
	Overall Depth	35mm
	Standards/Approvals	CE
	Overall Width	72mm
	Overall Height	113mm
	Maximum Operating Temperature	85°C

	Alles selecteren
	Merk SICK
	Encoder Technology Incremental
	Product Type Incremental Encoder
	Series DGS80
	Pulses Per Revolution 4096ppr
	Maximum Revolutions 3600rpm
	Output Signal Type HTL/Push Pull
	Shaft Type Through Hollow
	Shaft Diameter 42mm
	Interface Type Push Pull
	IP Rating IP65
	Terminal Type Cable
	Maximum Supply Voltage 30V
	Minimum Operating Temperature -25°C
	Overall Depth 35mm
	Standards/Approvals CE
	Overall Width 72mm
	Overall Height 113mm
	Maximum Operating Temperature 85°C

Datasheet - DGS80B-TYLK04096

Land van herkomst:: IT

Overview

The DGS80 is an incremental encoder with large hollow shaft diameters up to 42 mm. It can be used in countless industrial automation applications. Combined with the many connection options of the DGS80, its supply voltage range of 5 V to 30 V facilitates integration into most control systems. The incremental encoder is characterized by quick and easy installation.

This is made possible by its compact design, the clamping ring for speedy mounting, the universal stator couplings and the large selection of collets that simplify mounting on shafts of different size.

At a glance

Pulse per revolution: Up to 8,192

Housing diameter: 81 mm, diameter of through hollow shaft: 30 mm or 42 mm

Enclosure rating: IP65

Communication interfaces: TTL, HTL

Connection types: M12, M23 and MS male connector and cable

Collets available as accessories for adjusting to shafts of different size

Your Benefit

Large hollow shaft diameters and a wide range of collets eliminate the need for special couplings and allow for quick and easy integration into numerous applications

Easy integration into control systems thanks to large supply voltage range

Reduction of installation time thanks to the easy-to-mount clamping ring and the stator couplings

Compact, space-saving design facilitates installation in tight installation spaces

Applications

Fields of application

The large resolution range means the encoder is well-suited for many different industrial applications such as printing, scanning

and elevator speed control. Industrial applications such as speed measurement of AC motors, printing, scanning

Large hollow shaft diameters and rugged construction for applications in the timber and metal industry

AC motor applications thanks to large selection of insulating collets