SICK SKS/SKM36 Series Measuring Rotary Encoder 12V dc, 128 ppr ppr, Analogue Signal, Solid Type, 6 mm Shaft

RS-stocknr.:: 267-2068
Fabrikantnummer:: SKM36-HVA0-K02 / 1035601
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 349,46

(excl. BTW)

€ 422,85

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

4 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 349,46

*prijsindicatie

RS-stocknr.:: 267-2068
Fabrikantnummer:: SKM36-HVA0-K02 / 1035601
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Rotary Encoder
	Encoder Technology	Measuring
	Series	SKS/SKM36
	Pulses Per Revolution	128ppr
	Maximum Revolutions	4096rpm
	Output Signal Type	Analogue
	Shaft Type	Solid
	Shaft Diameter	6mm
	Interface Type	HIPERFACE
	Terminal Type	M12 Male Connector
	IP Rating	IP50
	Maximum Supply Voltage	12V dc
	Minimum Operating Temperature	-20°C
	Overall Depth	50mm
	Standards/Approvals	CE
	Overall Width	40mm
	Overall Height	54mm
	Maximum Operating Temperature	100°C
	Mount Type	Flange

	Alles selecteren
	Merk SICK
	Product Type Rotary Encoder
	Encoder Technology Measuring
	Series SKS/SKM36
	Pulses Per Revolution 128ppr
	Maximum Revolutions 4096rpm
	Output Signal Type Analogue
	Shaft Type Solid
	Shaft Diameter 6mm
	Interface Type HIPERFACE
	Terminal Type M12 Male Connector
	IP Rating IP50
	Maximum Supply Voltage 12V dc
	Minimum Operating Temperature -20°C
	Overall Depth 50mm
	Standards/Approvals CE
	Overall Width 40mm
	Overall Height 54mm
	Maximum Operating Temperature 100°C
	Mount Type Flange

Datasheet - SKM36-HVA0-K02

Land van herkomst:: DE

Overview

The SKS36/SKM36 Encoder is the first of a new generation of optical motor feedback systems. With 128 sine/cosine signals per revolution, this family represents the standard solution among the MFB systems with HIPERFACE®interface. Special feature of this generation: A very small code disk of only 2 mm code track radius allows for holistic scanning. In this, the unavoidable eccentricity errors of the code disk, ball bearing and shaft that occur with conventional systems are compensated for by the system. High angular speeds are no longer limited by the code disk due to the arrangement of the code disk in the middle of the rotary axle.

Absolute position indication with an increment number of 4,096 increments per revolution and a maximum of 4,096 revolutions. Storage of motor-specific data in the electronic type label and the programming are important features of this product family. The motor feedback systems certified to SIL2/PL d meet current requirements with regard to safety technology and make the certification process easier.

At a glance

Motor feedback systems for the standard performance range

128 sine/cosine periods per revolution

Absolute position with a resolution of 4,096 increments per revolution and 4,096 revolutions with the multitier system

Programming of the position value and electronic type label

HIPERFACE®

interface

Integrated version and stand-alone design

Certified according to SIL2/PL d (only valid for SKS36S/SKM36S-H...)

Conforms to RoHs

Your Benefit

The small dimension allows manufacturers of low-power and minimal-power motors to considerably reduce the size of their motors

The stand-alone version is ideally suited as a master and path encoders

The SKS/SKM36 motor feedback systems have strongly penetrated the drive technology market

The consistent mechanical components in SEK/SEL37 allow for a high degree of flexibility with various encoder systems

Applications

Safe motion monitoring of AGV systems and AGCs with one servo drive technology

Motion monitoring via HIPERFACE