SICK SRS/SRM50 Series Measuring Rotary Encoder 12V dc, 1024 ppr ppr, Analogue Signal, Blind Hollow Type, 15 mm Shaft

RS-stocknr.:: 267-2070
Fabrikantnummer:: SRM50-HPA0-K21 / 7127314
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 1.384,59

(excl. BTW)

€ 1.675,35

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 24 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 1.384,59

*prijsindicatie

RS-stocknr.:: 267-2070
Fabrikantnummer:: SRM50-HPA0-K21 / 7127314
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Rotary Encoder
	Encoder Technology	Measuring
	Pulses Per Revolution	1024ppr
	Series	SRS/SRM50
	Maximum Revolutions	4096rpm
	Output Signal Type	Analogue
	Shaft Type	Blind Hollow
	Shaft Diameter	15mm
	Interface Type	HIPERFACE
	IP Rating	IP65
	Maximum Supply Voltage	12V dc
	Minimum Operating Temperature	-40°C
	Overall Depth	93mm
	Standards/Approvals	CE
	Overall Width	63mm
	Overall Height	101mm
	Maximum Operating Temperature	75°C

	Alles selecteren
	Merk SICK
	Product Type Rotary Encoder
	Encoder Technology Measuring
	Pulses Per Revolution 1024ppr
	Series SRS/SRM50
	Maximum Revolutions 4096rpm
	Output Signal Type Analogue
	Shaft Type Blind Hollow
	Shaft Diameter 15mm
	Interface Type HIPERFACE
	IP Rating IP65
	Maximum Supply Voltage 12V dc
	Minimum Operating Temperature -40°C
	Overall Depth 93mm
	Standards/Approvals CE
	Overall Width 63mm
	Overall Height 101mm
	Maximum Operating Temperature 75°C

Datasheet - SRM50-HPA0-K21

Land van herkomst:: US

Overview

Used worldwide in a large variety of applications and environments - motor feedback systems of the SRS/SRM50 product family. With 1024 sine/cosine signals per revolution, this family represents the high-end solution of motor feedback systems with HIPERFACE®interface. They use a precise metal code disk and the largest possible distance between the two ball bearings. Absolute location indication with an increment number of 32,768 increments per revolution and a maximum of 4,096 revolutions.

Storage of motor-specific data in the electronic type label and the programming are important features of this product family. The motor feedback systems certified to SIL2/PL d meet current requirements with regard to safety technology and make the certification process easier.

At a glance

Motor feedback systems for the top performance range

1,024 sine/ cosine periods per revolution

Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multitier system

HIPERFACE®

interface: Programming of the position value and electronic type label

Insert shaft or tapered shaft with various torque supports

Integrated version, mounted version or stand-alone design

Certified according to SIL2/PL d (only valid for SRS50S/SRM50S...)

Conforms to RoHs

Your Benefit

Motor feedback system with HIPERFACE®

interface

High shock/vibration resistance thanks to built-in metal code disk

Consistent motor design due to identical size of single and multitier design

To use of a motor feedback system certified to SIL2/PL d makes it easier to have your system certified.

Very smooth running thanks to maximum ball bearing distance

Applications

Motion monitoring via HIPERFACE

Jerk-free acceleration and deceleration of elevator cars

Speed measurement on the elevator engine