SICK SFM60 Series Absolute Encoder 12V dc, 1024 ppr ppr, Sin/Cos Signal, Hollow Shaft Type, 15 mm Shaft

RS-stocknr.:: 285-4250
Fabrikantnummer:: SFM60-HPBT0K02 / 1053366
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 730,23

(excl. BTW)

€ 883,58

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 18 januari 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 730,23

*prijsindicatie

RS-stocknr.:: 285-4250
Fabrikantnummer:: SFM60-HPBT0K02 / 1053366
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Encoder Technology	Absolute
	Product Type	Encoder
	Pulses Per Revolution	1024ppr
	Series	SFM60
	Output Signal Type	Sin/Cos
	Shaft Type	Hollow Shaft
	Shaft Diameter	15mm
	Interface Type	HIPERFACE
	IP Rating	IP65
	Terminal Type	M12 Connector
	Maximum Supply Voltage	12V dc
	Minimum Operating Temperature	-40°C
	Standards/Approvals	ACMA declaration of conformity, CE, CHINA-RoHS, EU declaration of conformity, MAR Declaration of Conformity, UK declaration of conformity
	Maximum Operating Temperature	115°C
	Switching Frequency	200kHz

	Alles selecteren
	Merk SICK
	Encoder Technology Absolute
	Product Type Encoder
	Pulses Per Revolution 1024ppr
	Series SFM60
	Output Signal Type Sin/Cos
	Shaft Type Hollow Shaft
	Shaft Diameter 15mm
	Interface Type HIPERFACE
	IP Rating IP65
	Terminal Type M12 Connector
	Maximum Supply Voltage 12V dc
	Minimum Operating Temperature -40°C
	Standards/Approvals ACMA declaration of conformity, CE, CHINA-RoHS, EU declaration of conformity, MAR Declaration of Conformity, UK declaration of conformity
	Maximum Operating Temperature 115°C
	Switching Frequency 200kHz

Datasheet - SFM60-HPBT0K02

Land van herkomst:: DE

Overview

SICK is rounding out its portfolio with the optical high-resolution SFS/SFM60 motor feedback systems in hollow shaft design. Especially with self- and force-ventilated synchronous motors, this mechanical component meets customer requirements, as do various hollow shafts and high protection classes (IP65). A wide variety of product variants fulfils nearly every requirement. The SFS/SFM60 motor feedback systems use a globally standardized interface.

It provides maximum flexibility and reduces installation times - plug & play at its best. The rugged shaft bearing increases the service life and at the same time reduces the servicing and maintenance requirements. It also achieves optimum concentricity and a previously unattainable low level of vibration even at maximum operating speeds.

At a glance

HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems

1,024 sine/cosine periods per revolution

Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system

Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various stator couplings

IP65 protection class

Certified according to SIL2/PL d (only valid for SFS60S/SFM60S...)

Your Benefit

Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label

Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life

The nickel code disk offers a high degree of vibration resistance and an extended temperature range

Shorter development times through standardized mechanical interface

Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.

Applications

Factory automation

Drives and controls: Jerk-free acceleration and deceleration of elevator cars

Logistics automation

Building management: Speed measurement on the elevator engine